DHCP assignment taking too long, Windows computer not Identify network

DHCP assignment taking too long, Windows computer not Identify network

DHCP assignment taking too long, Windows computer not Identify network
DHCP assignment taking too long, Windows computer not Identify network
2024-02-10 02:22:43 - last edited 2024-02-10 23:34:41
Hardware Version:
Firmware Version: 1

I having issues were there is long time to identify network and DHCP assigments. Clients don't release or get new IP settings when disconnect/reconnect, regardless of moving between network or VLANs. previously it was very quick to identify and assign addresses.

 

Running Omada Controller with ER707-M2 Router and TL-SG3428XPP-M2 switch

    Router is assigned the first address in all subnets i.e. 192.168.0.1 for default LAN

    Switch is assigned the third address in all subnets i.e. 192.168.0.3; 192.168.11.3 and so on.

 

LAN default Gateway is the switch address 192.168.0.3 (allows the switch to do routing for LAN network) and the switch has a static assigned address and gateway.

Static IP 192.168.0.3; Subnet 255.255.255.0; Gateway 192.168.0.1

 

One LAN network interface with DHCP server on router(Using assigned static DHCP reservations for all know/fixed devices)

 

have VLANs with DHCP server on switch (VLAN11, VLAN22, VLAN33, VLAN44) 

 

VLAN## Setup

Static Address 192.168.##.3/255.255.255.0

DHCP Server 192.168.##.0/24

DNS 1.1.1.1/1.0.0.1

Gateway 192.168.##.3 (Switch Static Address)

 

Have created static route on Gateway to Switch for VLANS

Destination Subnets -192.168.11.0/24 ;192.168.22.0/24; 192.168.33.0/24; 192.168.44.0/24

Next ho - 192.168.0.3 (Switch static address)

 

Any help with problem, settings or firewall would be appreciated.

  0      
  0      
#1
Options
1 Reply
Re:DHCP assignment taking too long, Windows computer not Identify network
2024-02-19 03:12:39

Hi @mstamp,

 

@Clive_A will help you, @Clive_A look here.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options