Firmware upgrade fail
Firmware upgrade fail
Tags:
#Firmware Update
Hi,
Just bought
1. ER605 - Router
2. TL-SG2428P - 24P switch
3. OC200 - Hardware controller.
I tried to upgrade Router's firmware (2.1.2 Build 20230210 Rel.62992) to :
Process was OK, and rebooted at the end as expected.
After reboot- frimware noted as same before:
Why is that ?
Guy
1 Accepted Solution
Re:Firmware upgrade fail-Solution
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting Manual ★ ☚
(Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Re:Firmware upgrade fail-Solution
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting Manual ★ ☚
(Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)