Routing between “Branch” (VPN) sites.

Routing between “Branch” (VPN) sites.

Routing between “Branch” (VPN) sites.
Routing between “Branch” (VPN) sites.
2024-03-21 20:47:26 - last edited 2024-03-22 01:05:15
Model: ER8411  
Hardware Version: V1
Firmware Version: 1.2.0

I have an NHQ site (ER8411 fw1.2.0) with multiple "Branch" sites (ER7206 fw1.4.1). They are all managed by a single controller (OC200 5.13.24) and all the branchs are connected to the NHQ site via "manual" IPsec VPNs (could not get Auto IPsec to work). I want the branchs to be able to access each others resource in addition to the NHQ resources. At the moment in this spoke/hub configuration each branch can only access the NHQ resources (while NHQ can access all the branchs). How can I configure the routing table to allow inter-branch access without creating VPN tunnels directly between the branch's?

 

Thanks

  0      
  0      
#1
Options
1 Accepted Solution
Re:Routing between “Branch” (VPN) sites.-Solution
2024-03-22 01:05:11 - last edited 2024-03-22 01:05:15

Hi @BAchorn 

Thanks for posting in our business forum.

This can be found in the Stories we have.

Connecting Three VPN Routers of Different Geographic Locations Using IPSec VPN

 

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. Don't be a lazy asker. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Routing between “Branch” (VPN) sites.-Solution
2024-03-22 01:05:11 - last edited 2024-03-22 01:05:15

Hi @BAchorn 

Thanks for posting in our business forum.

This can be found in the Stories we have.

Connecting Three VPN Routers of Different Geographic Locations Using IPSec VPN

 

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. Don't be a lazy asker. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 212

Replies: 1

Related Articles