oc200 v1 Dpi Help

oc200 v1 Dpi Help

oc200 v1 Dpi Help
oc200 v1 Dpi Help
2024-04-07 02:13:03 - last edited 2024-04-09 12:31:51
Model: OC200  
Hardware Version: V1
Firmware Version:

what device have Deep pocket Inspection (DPI)? routrer or ap?? and is there any update in oc200 for DPI update?? or in er605

  0      
  0      
#1
Options
1 Accepted Solution
Re:oc200 v1 Dpi Help-Solution
2024-04-08 05:51:41 - last edited 2024-04-09 12:31:51

 

jhaime11 wrote

what device have Deep pocket Inspection (DPI)? routrer or ap?? and is there any update in oc200 for DPI update?? or in er605

Hi @jhaime11 

You can check the firmware update on both the controller and the router. Only when both the controller and router support the DPI will you be able to use this feature properly.

 

For ER605 V2 with latest firmware, it will support for Deep Packet Inspection.

 

However, the DPI feature has not been added into the OC200 with latest firmware 5.13 currently. You may wait for the hardware controller 5.14 version update. But please note that the estimated date and whether this feature will be updated cannot be guaranteed, as the actual implementation depends on the firmware update status at that time. By now you can have the software controller with DPI feature.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
4 Reply
Re:oc200 v1 Dpi Help-Solution
2024-04-08 05:51:41 - last edited 2024-04-09 12:31:51

 

jhaime11 wrote

what device have Deep pocket Inspection (DPI)? routrer or ap?? and is there any update in oc200 for DPI update?? or in er605

Hi @jhaime11 

You can check the firmware update on both the controller and the router. Only when both the controller and router support the DPI will you be able to use this feature properly.

 

For ER605 V2 with latest firmware, it will support for Deep Packet Inspection.

 

However, the DPI feature has not been added into the OC200 with latest firmware 5.13 currently. You may wait for the hardware controller 5.14 version update. But please note that the estimated date and whether this feature will be updated cannot be guaranteed, as the actual implementation depends on the firmware update status at that time. By now you can have the software controller with DPI feature.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
Re:oc200 v1 Dpi Help
2024-04-09 07:37:40
thanks for the update. is there a chance that oc200 will have Dpi in near future sir?
  1  
  1  
#3
Options
Re:oc200 v1 Dpi Help
2 weeks ago

Hank21 wrote

For ER605 V2 with latest firmware, it will support for Deep Packet Inspection.

 

However, the DPI feature has not been added into the OC200 with latest firmware 5.13 currently. You may wait for the hardware controller 5.14 version update. But please note that the estimated date and whether this feature will be updated cannot be guaranteed, as the actual implementation depends on the firmware update status at that time. By now you can have the software controller with DPI feature.

  @Hank21 Is there anything to say about the implementation of Deep Packet Inspection (DPI) on a OC200 ?

  0  
  0  
#4
Options
Re:oc200 v1 Dpi Help
2 weeks ago

Hi @RBL 

 

It will be available within 1 month, please wait for the next OC200 firmware update. 

RBL wrote

Hank21 wrote

For ER605 V2 with latest firmware, it will support for Deep Packet Inspection.

 

However, the DPI feature has not been added into the OC200 with latest firmware 5.13 currently. You may wait for the hardware controller 5.14 version update. But please note that the estimated date and whether this feature will be updated cannot be guaranteed, as the actual implementation depends on the firmware update status at that time. By now you can have the software controller with DPI feature.

  @Hank21 Is there anything to say about the implementation of Deep Packet Inspection (DPI) on a OC200 ?

 

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  1  
  1  
#5
Options

Information

Helpful: 0

Views: 375

Replies: 4

Related Articles