Business Community > Switches > tl-sg108 not passing igmp or udp?
< Switches

tl-sg108 not passing igmp or udp?

tl-sg108 not passing igmp or udp?

tl-sg108 not passing igmp or udp?
tl-sg108 not passing igmp or udp?
3 weeks ago
Tags: #igmp udp
Model: TL-SG108  
Hardware Version: V4
Firmware Version:

I have several of these switches in a few wireless mic racks and I'm having trouble seeing them via the manufacturer's software (Shure).  It appears that all the traffic that they use is IGMP multicast and UDP.  If I connect them to a "real" switch (cisco), they communicate but through these tp link, they do not. Has anyone else experienced this?

 

TP Link Switch (from Wireshark):

"No.","Time","Source","Destination","Protocol","Length","Info"
"65","61.904676","10.10.0.98","224.0.0.22","IGMPv3","54","Membership Report / Join group 239.255.254.253 for any sources"
"66","62.001376","10.10.0.98","224.0.0.22","IGMPv3","54","Membership Report / Join group 239.255.254.253 for any sources"
"67","62.108703","10.10.0.98","239.255.254.253","UDP","359","8427 → 8427 Len=317"

 

Cisco Switch (from Wireshark):

"No.","Time","Source","Destination","Protocol","Length","Info"
"83","25.327861","10.10.0.98","224.0.0.22","IGMPv3","54","Membership Report / Join group 239.255.254.253 for any sources"
"84","25.495135","10.10.0.98","224.0.0.22","IGMPv3","54","Membership Report / Join group 239.255.254.253 for any sources"
"86","25.532541","10.10.0.98","239.255.254.253","UDP","359","8427 → 8427 Len=317"
"87","26.002212","10.10.0.158","239.255.254.253","UDP","349","8427 → 8427 Len=307"
"89","26.369149","10.10.0.98","10.10.0.158","UDP","123","52241 → 57383 Len=81"
"90","26.370591","10.10.0.158","10.10.0.98","UDP","109","57383 → 52241 Len=67"
"91","26.371459","10.10.0.158","10.10.0.98","UDP","129","57383 → 52241 Len=87"
"92","26.371651","10.10.0.98","10.10.0.158","UDP","109","52241 → 57383 Len=67"
"93","26.371726","10.10.0.98","10.10.0.158","UDP","120","52241 → 57383 Len=78"

  0      
 
  0      
 
#1
Options
5 Reply
Re:tl-sg108 not passing igmp or udp?
3 weeks ago

Hi @jimjr555 

Thanks for posting in our business forum.

There is nothing different between Cisco and TP-Link in the IGMP. However, 0.158 does not join the group.

So, here's my question, how do they connect together? Net diagram?

And about the 0.158, this IP address, where is the packet from it when it is connected to the SG108 switch?

 

Since this is a dummy switch, I think there is nothing particular we can do to change this. But IGMP indeed looks like working fine based on your Wireshark. It is just the other mic did not join the group.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Beta firmware got some NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
  0  
  0  
#2
Options
Re:tl-sg108 not passing igmp or udp?
3 weeks ago

  @Clive_A - laptop and mic (.158) are both connected to random ports on the sg108 (and even tried a different sg108 - same result).  Duplicated the same setup with the Cisco switch.

  0  
  0  
#3
Options
Re:tl-sg108 not passing igmp or udp?
3 weeks ago

Hi @jimjr555 

Thanks for posting in our business forum.

jimjr555 wrote

  @Clive_A - laptop and mic (.158) are both connected to random ports on the sg108 (and even tried a different sg108 - same result).  Duplicated the same setup with the Cisco switch.

If this persists, I would assume it is a problem with the switch. Maybe this unmanaged switch missing a feature because it only provides the IGMP Snooping. Unless the managed one which you can determine if the packet is dropped or not.

 

Do you have the Wireshark results from the SG108 to show the full interaction?

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Beta firmware got some NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
  0  
  0  
#4
Options
Re:tl-sg108 not passing igmp or udp?
3 weeks ago

  @Clive_A I've actually got Wireshark files for both the Cisco and the SG (zip attached).

File:
dump.zipDownload
  0  
  0  
#5
Options
Re:tl-sg108 not passing igmp or udp?
3 weeks ago

  I have confirmed that this is only an issue with the TP Link switches.  I tried a new one (fresh out of the box), same issue.  I had a couple of unmanaged Aruba switches (model 1430) and tried those and the problem again goes away so it's definitely the TP Link stuff...

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 123

Replies: 5

Tags

igmp udp
Related Articles
Main Network Not Passing Through TL-SG108E
311 0
Disable IGMP snooping for TL-SG108 ?
3265 0
switch not passing DHCP
295 0
TL-SG108 supply
1255 0
TL-SG108 not connecting to iMac
175 0
TL-SG108 V3 - Long cable
39 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.