TomMad wrote

In the Omada controller, I had the ER706W device as a gateway. For this device I have defined OpenVPN Server SSL (server-client) with port 1194 and address 192.168.aaa.0/24. I had to change my router to an ER605 v2 which does not support OpenVPN SSL. The option is gone. But now when I try to define a standard OpenVPN server with the same parameters (port, addressing), it says there is a conflict with the OpenVPN SSL configuration. How do I remove the old configuration if I no longer have OpenVPN SSL in the menu?

 

Hi @TomMad 

If you have adopted the ER605, may I suggest you try to forget the ER605 from the controller so that you will be able to find the SSL VPN option without any router on controller? Once you can find the option can you delete that rule. After that you can adopt the ER605 again.

Besides, I will forward this feedback to the developer department and hope this issue will be optimized.