1
Votes

Reducing the minimum camera dwell time in patrol scanning.

 
1
Votes

Reducing the minimum camera dwell time in patrol scanning.

Reducing the minimum camera dwell time in patrol scanning.
Reducing the minimum camera dwell time in patrol scanning.
2 weeks ago - last edited 2 weeks ago
Model: VIGI C540  
Hardware Version: V2
Firmware Version: 2.0.0 Build 231124 Rel.55573n

Hi,

I propose to reduce the minimum camera dwell time in patrol scanning from 60 seconds to 15 seconds, which will allow for better coverage of the monitored area.

In my opinion, the current dwell time of the camera is too long, which makes the camera not very useful and it can easily miss something important when looking at another place too long.

#1
Options
1 Accepted Solution
Re:Reducing the minimum camera dwell time in patrol scanning.-Solution
2 weeks ago - last edited 2 weeks ago

Hi @KamileN7 
Thanks for posting in our business forum.
Unfortunately, we will not change this patrol time on our system.

We set this to 60s due to the consideration of the life span of the product. If setting this parameter low, you device may be retired very soon due to the malfunction in the pivot.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Beta firmware got some NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Recommended Solution
#2
Options
1 Reply
Re:Reducing the minimum camera dwell time in patrol scanning.-Solution
2 weeks ago - last edited 2 weeks ago

Hi @KamileN7 
Thanks for posting in our business forum.
Unfortunately, we will not change this patrol time on our system.

We set this to 60s due to the consideration of the life span of the product. If setting this parameter low, you device may be retired very soon due to the malfunction in the pivot.

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Beta firmware got some NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Recommended Solution
#2
Options

Information

Helpful: 1

Views: 364

Replies: 1

Voters 1

voter's avatar