Business Community > Routers > How to set priority for a set of clients
< Routers

How to set priority for a set of clients

How to set priority for a set of clients

How to set priority for a set of clients
How to set priority for a set of clients
2024-05-14 22:00:02 - last edited 2024-05-15 01:04:26
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version: 1.4.1

I've just rolled out omada managed switches and endpoints.  Before this I was using a Deco system which allowed me to tag some devices as "high priority"

 

How can I do something similar with the business tools?  I'm running an Omada controller.

 

Thanks in advance.

 

Tom

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:How to set priority for a set of clients-Solution
2024-05-15 01:04:21 - last edited 2024-05-15 01:04:26

Hi @LeadershipGeek 

Thanks for posting in our business forum.

No. There is not. You can consider the QoS if your model supports it.

Bear in mind that the business products are not the same as the home ones from the setup process to the key features. QoS on the business products are manually configured.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:How to set priority for a set of clients-Solution
2024-05-15 01:04:21 - last edited 2024-05-15 01:04:26

Hi @LeadershipGeek 

Thanks for posting in our business forum.

No. There is not. You can consider the QoS if your model supports it.

Bear in mind that the business products are not the same as the home ones from the setup process to the key features. QoS on the business products are manually configured.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
Recommended Solution
  0  
  0  
#2
Options
Re:How to set priority for a set of clients
2024-05-15 01:14:12

  @Clive_A - that is unfortunate.  My model DOES support QOS.  Can you point me to an overview of how to configure QOS?

  0  
  0  
#3
Options
Re:How to set priority for a set of clients
2024-05-15 01:29:31

Hi @LeadershipGeek 

Thanks for posting in our business forum.

LeadershipGeek wrote

  @Clive_A - that is unfortunate.  My model DOES support QOS.  Can you point me to an overview of how to configure QOS?

How to Configure QoS (Quality of Service) on Omada Router

Go to our label and check more guides:

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ (Disclaimer: Short links are used above solely for guidance to TP-Link subdomains and are safe and tracker-free. Exercise caution with short links from non-official members on forums. We are not liable for external content or damage from non-official members' link use.)
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 136

Replies: 3

Related Articles
How do I set up Split Tunneling?
1887 0
Set up
415 0
How to set CyberGhostVPN in Omada ER7206, is possible?
289 0
Can‘t set bandwidth limit on ER7206.
237 0
VLAN set-up
377 0
Set QOS class for IP-Sec and OPenVPN
374 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.