Deleted EAP not discovered from controller
Hi,
I've installed an Omada Controller via docker in a complete new network. I use the following hardware:
- 1 x SG3218XP-M2 v1.0 (1.0.2)
- 1 x SG3428XPP-M2 v1.20 (1.20.2)
- 2 x EAP673(EU) v1.0 (1.0.3)
After the first installation all works well. Then I moved the hardware to our buero and there one of the EAP673 couldn't adopted. No restart, no factory reset of the eap helped. So I deleted/forgot the eap in the controller.
Since then the eap wouldn't discovered by the controller anymore. I can't adopt it, because the eap wouldn't listed in the device list.
The Interface on the switch is the same VLAN, where the controller is in. With pluggedin cable and factory reset on the eap the following lines comes in the server.log:
06-07-2024 10:16:27.236 INFO [monitor-topology-pool-3] [] c.t.s.o.c.u.e.a(): list local interface macs: [02-42-5F-A3-33-31, BC-24-11-2F-C8-A6]
06-07-2024 10:16:30.902 INFO [discovery-work-group-1] [] c.t.s.o.m.d.d.m.d.a(): NO_MANAGED Device 98-25-4A-60-20-D2 on omadac 85c9fd003879076e6386eeee40e983ad is discovered.
06-07-2024 10:17:49.347 INFO [server-comm-pool-3] [] c.t.s.e.s.c.h.EcspV2DeviceContextHelper(): pending device 98-25-4A-60-20-D2 time out, remove device context
06-07-2024 10:17:49.534 INFO [device-timeout-workgroup-0] [] c.t.s.o.m.d.d.m.j.b(): timeoutWiredPending, OmadacId OmadacId(85c9fd003879076e6386eeee40e983ad) Device DeviceMac(98-25-4A-60-20-D2).
The eap get's an ip address and I can ping him. But it wouldn't discovered.
How can I readopt it again?
Thanks
Ulf
Yes, the ports are open. Here a list from the host system, which ports are listening:
The complete hardware construct where working on my home lab. I set everything up from scratch in my home lab. There adoption/discovery was functionally. The controller is a vm on a Proxmox host.
OPNsense Firewall
- management vlan
- omada
- switches
- access points
- software distribution
- proxmox host
- office vlan
- app server
- workstations
I moved the complete hardware to the office. So only the internet access has changed. The two switches and the one accesspoint are online. The second accesspoint not. I suspect that it has something to do with the fact that I deleted the access point from the controller. Before the deletion the controller couldn't adopt the accesspoint. After deletion and factory reset (10 sec) the accesspoint wasn't discovered anymore.