Home

Forums

Stories

Knowledge Base

Business Community > Routers > ER605 v2 with Festa no entry clients device in table

< Routers

ER605 v2 with Festa no entry clients device in table

Auu

2024-06-17 10:42:28 - last edited 2024-06-18 02:14:29

Posts: 13

Helpful: 11

Solutions: 0

Stories: 0

Registered: 2021-02-14

ER605 v2 with Festa no entry clients device in table

2024-06-17 10:42:28 - last edited 2024-06-18 02:14:29

Dear @David-TP and Team

I just bought ER605 v2 and sync with TP-Link Festa, but it's have no any information such as "Client", "Most Active Clients". In fact, there are about 10+ connected devices both wired and wireless.

1 Accepted Solution

Clive_A

2024-06-18 02:14:08 - last edited 2024-06-18 02:23:21

Posts: 5543

Helpful: 2661

Solutions: 1239

Stories: 0

Registered: 2023-06-09

Re:ER605 v2 with Festa no entry clients device in table -Solution

2024-06-18 02:14:08 - last edited 2024-06-18 02:23:21

Hi @Auu

First time reminder for posting the thread on the wrong page.

Please do not use Festa if your model is not listed in the Festa: https://www.tp-link.com/en/business-networking/all-soho-festa/

This will be moved to the Omada router page. If this happens again posting on the wrong page, your post will be deleted without further notification.

ER605 is a product from Omada solution and you should be using the Omada Controller to manage it.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Recommended Solution

Auu

LV1

2024-06-18 04:16:08 - last edited 2024-06-18 04:21:36

Posts: 13

Helpful: 11

Solutions: 0

Stories: 0

Registered: 2021-02-14

Re:ER605 v2 with Festa no entry clients device in table

2024-06-18 04:16:08 - last edited 2024-06-18 04:21:36

@Clive_A Noted, Thank you

I know it should be using the Omada Controller to manage it, but ER605 (TL-R605) V2 is complatible with Festa too.

And I think this is the problem I encountered when using it with Festa.

Clive_A

2024-06-18 05:55:46

Posts: 5543

Helpful: 2661

Solutions: 1239

Stories: 0

Registered: 2023-06-09

Re:ER605 v2 with Festa no entry clients device in table

2024-06-18 05:55:46

Hi @Auu

Auu wrote

@Clive_A Noted, Thank you

I know it should be using the Omada Controller to manage it, but ER605 (TL-R605) V2 is complatible with Festa too.

And I think this is the problem I encountered when using it with Festa.

I recommend you send an email to the local support in Thailand. I checked your local site but it indeed showed this.

However, as for the global site and my knowledge, we have not been informed that the Festa could be compatible or controlled with Omada.

ER605 v2 with Festa no entry clients device in table

ER605 v2 with Festa no entry clients device in table

Information

Voters 0

Tags