ER7206 Access remote subnet via OpenVPN client
I have set up an OpenVPN VPN on the ER7206 and it is working fine to access the local subnet (192.168.1.0/24)
We also have a Site-to-site VPN connected through the ER7206 and working which has a different subnet (192.168.16.0/24). I can access the remote subnet fine from the local network.
The OpenVPN clients connect and can access the local subnet (192.168.1.0/24) but not the remote subnet (192.168.16.0/24) through the site-to-site VPN.
I have set the Local Network on the ER7206 OpenVPN settings page to be 192.168.0.0/16 which if my reading is correct, should allow acces to the other subnet.
Any ideas what I am doing wrong?
I have not tested OpenVPN but with Wireguard it works, try and include OpenVPN ip net in Ipsec s2s VPN, local and remote subnet from OpenVPN in s2s VPN config.
it should work with OpenVPN as well, here I only have 1 IP as you can see, you can also use /24 for example or whatever you have configured in your OpenVPN
