Business Community > Safestream Routers > Router blocking css files
< Safestream Routers

Router blocking css files

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Router blocking css files

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Router blocking css files
Router blocking css files
2024-07-11 13:42:19 - last edited 2024-07-12 12:46:20
Model: TL-R480T+  
Hardware Version: V9
Firmware Version: 9.0.3 Build 20200313 Rel.38262

Hi, I'm (again) with a problem that my load balancer doesn't allow some CSS file load.

I had this problem last year and I resolved it by putting the IP from sites I wanted to load in the Static Route Table. Using only LAN 2 to do this connection.
But about 2 weeks ago the same error started again and I don't know why. The configs are the same, nothing changed. 

I have two LAN's connected. If I use a computer plugged into the modem I can connect to the site. But if I use the balancer I get the error.
And I have some Voip phones connected in the wan and they started giving me some problems about 2 weeks ago too.
So, something happened but I don't know what. How can I resolve this?

 

Here Is the Static Route config.

 

My WAN 1 is using the DNS 1.1.1.1 and 1.0.0.1 and WAN 8.8.8.8, 8.8.4.4

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Router blocking css files-Solution
2024-07-12 02:09:27 - last edited 2024-07-12 12:46:20

Hi @Andy_Silvestre 

Thanks for posting in our business forum.

Andy_Silvestre wrote

Hi, I'm (again) with a problem that my load balancer doesn't allow some CSS file load.

I had this problem last year and I resolved it by putting the IP from sites I wanted to load in the Static Route Table. Using only LAN 2 to do this connection.

Set up the Policy Routing. Not static routing.

If this happens again, it is not a problem with the router. The IP might be changed or some rules have been modified on their end. That's the problem.

Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:Router blocking css files-Solution
2024-07-12 02:09:27 - last edited 2024-07-12 12:46:20

Hi @Andy_Silvestre 

Thanks for posting in our business forum.

Andy_Silvestre wrote

Hi, I'm (again) with a problem that my load balancer doesn't allow some CSS file load.

I had this problem last year and I resolved it by putting the IP from sites I wanted to load in the Static Route Table. Using only LAN 2 to do this connection.

Set up the Policy Routing. Not static routing.

If this happens again, it is not a problem with the router. The IP might be changed or some rules have been modified on their end. That's the problem.

Recommended Solution
  1  
  1  
#2
Options
Re:Router blocking css files
2024-07-12 13:11:18
Hi Clive. It worked THANK YOU. You really saved my day. Just one question, what does Static routing do at all? I thought it was to direct a connection to a specific WAN.. but it doesn't work this way...
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 524

Replies: 2

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.