Business Community > Routers > [SOLVED] Initial setup after resetting ER605
< Routers

[SOLVED] Initial setup after resetting ER605

[SOLVED] Initial setup after resetting ER605

[SOLVED] Initial setup after resetting ER605
[SOLVED] Initial setup after resetting ER605
2024-07-12 10:51:40 - last edited 2024-07-15 12:25:53
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.2

Hey,

I needed to reset my Omada ER605. I unplugged it for about 1minute, plugged it back and waited for the bootup. After System LED was blicking slowly, i hold reset button for 6 seconds until both Power and System LEDs were blicking fast, turned off and on. After this the Power LED is turned on (logically) and System LED blicking kinda normal.
 

I put the IP address ipconfig shows its connected to (not the printed one cuz it doesnt work lol) into URL, ping is coming from it but the site is not responding.
What should i do ?

Thanks for any ideas.

 

Solved that mystery! The issue was a cable which is somehow working fine for my colleague. The previous IP address was 169.254.79.150 (really strange lol). The printed one is working now idk what was the issue.

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:[SOLVED] Initial setup after resetting ER605-Solution
2024-07-12 21:30:00 - last edited 2024-07-15 01:33:39

  @Ondy 

 

169.254.79.150 is a link-local IP address.

Most probably your computer didn't receive an IP address from the ER605 DHCP server.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  2  
  2  
#2
Options
Re:[SOLVED] Initial setup after resetting ER605-Solution
2024-07-15 01:35:21 - last edited 2024-07-15 01:35:24

Hi @Ondy 

Thanks for posting in our business forum.
When the cable is broken, it will lose Internet and DHCP IP. That's why 169.254.X.X IP was assigned to itself. The computer can assign itself an IP like that to suggest that there might be an issue with the cable or DHCP server. Check the connections and configs.

Good to know it is resolved by replacing the cable. wink

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  2  
  2  
#4
Options
4 Reply
Re:[SOLVED] Initial setup after resetting ER605-Solution
2024-07-12 21:30:00 - last edited 2024-07-15 01:33:39

  @Ondy 

 

169.254.79.150 is a link-local IP address.

Most probably your computer didn't receive an IP address from the ER605 DHCP server.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  2  
  2  
#2
Options
Re:[SOLVED] Initial setup after resetting ER605
2024-07-13 19:13:43 - last edited 2024-07-15 01:27:48

  @terziyski 

Im pretty sure it was public address cuz i searched it up on Google and it literally said "Your public IP Address is:" so...

  0  
  0  
#3
Options
Re:[SOLVED] Initial setup after resetting ER605-Solution
2024-07-15 01:35:21 - last edited 2024-07-15 01:35:24

Hi @Ondy 

Thanks for posting in our business forum.
When the cable is broken, it will lose Internet and DHCP IP. That's why 169.254.X.X IP was assigned to itself. The computer can assign itself an IP like that to suggest that there might be an issue with the cable or DHCP server. Check the connections and configs.

Good to know it is resolved by replacing the cable. wink

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  2  
  2  
#4
Options
Re:[SOLVED] Initial setup after resetting ER605
2024-07-15 09:45:50

  @Clive_A 
Heyy, just to inform you that it was not the ethernet cable. I had a connected rj45 from omada to RJtoUSB converter which we found out it doesnt work 100%. So now i just connect directly RJ45 from Omada to my PC without any converter.

  1  
  1  
#5
Options

Information

Helpful: 0

Views: 479

Replies: 4

Related Articles
 trouble resetting er605
1243 0
ER605 v2.0 Wireguard setup
5207 0
ER605 ACL Setup - Help Please
585 0
ER605 Site to Site Wireguard setup
1798 0
Er605 VPN setup using noip
419 0
 Cannot adopt ER605 (SOLVED...)
9618 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.