Connectivity problem

ghost124

2024-08-20 08:25:35

Posts: 18

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-07-10

Connectivity problem

2024-08-20 08:25:35

Tags: #Configuration

Model: TL-SG3428

Hardware Version: V2

Firmware Version:

Hello,

first time using TL switchs, i have a problem when i ping from PC-A to PC-B, note that i didn't enter any configuration that's mean that the switsh is on the factory config, i just plugin the ethernet cable of PC-A in Port 1/0/1 and PC-B on port 1/0/2. I tried ping between the two pc but it didnt work.

Also i tried to ping the default interface of the default network which 192.168.0.1 and the ping is succed. So the to PCs ping 192.168.0.1 and didn't ping each other.

1 Reply

Clive_A

2024-08-21 01:07:13

Posts: 6028

Helpful: 2966

Solutions: 1384

Stories: 0

Registered: 2023-06-09

Re:Connectivity problem

2024-08-21 01:07:13

Hi @ghost124

Thanks for posting in our business forum.

You should connect your router to the switch. The switch is not a DHCP server unless you configure it to be but that'll be a whole different story and purpose.

If you just need the switch to become a large port extender, you should connect the router to it and the rest of the ports will get Interent.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Connectivity problem

Connectivity problem

Information

Voters 0

Tags