Swicht TL-SG2008
Hello everyone.
I need to configure this switch according to certain specifications and I have tried several times, watched videos on YouTube but I can't get it to work.
What I need is:
port 1 connect to my isp's modem that gives me a fixed ip (190.111.xxx.xxx) mask 255.255.255.0 gateway 190.111.xxx.1
port 2 connect by dhcp to an internal LAN that gives me 192.168.64.xxx mask 255.255.254.0 gateway 192.168.64.1
3/4/5 vlan ports for IP phones 192.168.100.1 255.255.255.0
ports 6/7/8 vlan for pcs 192.168.200.1 255.255.255.0
The las 2 vlans must be out to internet and view the lan on port 2.
I can set the vlans and activate the dhcp and if I connect a phone or a PC it gives me the corresponding IP but what it always gives me in the down state is port 1 and 2.
A router connected to my ISP is necessary to provide internet because it doesn't work for me that way either.
Will there be any tips or instructions to guide me?
Thanks in advance.