omada controller remote site access
Hi I am planning my new home network and restaurant network as shown in the topology diagram below.
I want to know if i will be able to control / configure my restaurant network with the oc200 hardware controller?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @corkscrew22
Yes, we can use an OC200 to manage SDN devices in a remote site. Below is the guide:
- Copy Link
- Report Inappropriate Content
@Vincent-TP Hi yes i have followed the guide you mentioned
Step1 set up port fwd via the oc200 hardware controller on the home nework done ok
For step 2 on the remote network (set up at home and connected to with my laptop) am trying to use method 2 Standalone management page, under controller inform URL it will not accept the url for my no ip ddns server i am using the following format as per the noip instructions
http://username:password@dynupdate.no-ip.com/nic/update?hostname=domain&myip=ip
the ddns host is working i can see it via nslookup
maybe tp-link er605 needs different format ?
- Copy Link
- Report Inappropriate Content
Hi @corkscrew22
I should mention that we should open ports 29810-29816, two more ports.
Please have another try.
- Copy Link
- Report Inappropriate Content
@Vincent-TP tried that made no difference...
I still think its somthing to do with in the "controller inform url" will not except the noip url in the format below
http://username:password@dynupdate.no-ip.com/nic/update?hostname=domain&myip=ip
it will except xxxx.ddns.net but thats obviousley no use on its own without the log in credentials....
- Copy Link
- Report Inappropriate Content
Hi @corkscrew22
The inform URL on that page is specially for cloud-based controllers.
For the hardware controller, please input the public IP address.
- Copy Link
- Report Inappropriate Content
Hi
i have input the public ip as you say in both the ER605 and the EAP245 they still do not show up in thje oc200 interface how long does it normally take for them to show up initially?
I not sure how this can work since the OC200 is behind a dynamic ip address?
I think having read this post i believe the controller is behind GGNAT and so i will be unable to control the devices at the remote site
https://community.tp-link.com/en/business/forum/topic/655050
- Copy Link
- Report Inappropriate Content
Hi @corkscrew22
Now I understand.
You may refer to the following page to input the corresponding account info on the router, and the domain name is the inform URL you should input on the device page:
- Copy Link
- Report Inappropriate Content
yes i already tried that it does not work I have however found an easy solution, since i have purchased a hardware controller then im entitled to free cloudbased controller.
So I installed the omada ap onto my phone, then scanned the bar codes for the ER605 and EAP245 and bingo i can now control them remotley.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 352
Replies: 8
Voters 0
No one has voted for it yet.