In an Omada system, over 25 units (ER 7206 /6x EAP610/10x EAP225) are connected with Vlan (1, 50, 100, 200).
CPE710 antennas are used over long distances. Everything works wonderfully.
Now the Bridge215 is to be used as a new connection over 1KM.
Set up and running. 
However, if wlan networks with V-Lan are set on the client bridge, there is no connection.
If, for example, an EAP225 is connected behind the client bridge, its WLAN networks with VLAN do not get through. 

If I take the Vlans out, there is a connection.
All devices are controlled via the Omada software.
So is it really possible that this bridge does not do VLAN passthrough?

Or am I doing something wrong? All settings (the few) are in the default setting.

If this is really the case, this bridge is probably not suitable for large Omada networks.

Stefan