Wireguard configuration help
Hello,
I kept trying for couple of days and now I wonder if it's even possible.
Two devices: TL-ER7206 at office and TL-WR1502X which should accompany me at hotel.
I don't have an Omada controller.
I was trying to set them up with Wireguard VPN but no luck yet.
Should this work with those two devices? So I keep trying
Or should I just stick with the old OpenVPN?
Thanks,
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Costy66
Thanks for posting in our business forum.
Use the label and tag, Wireguard and Configuration, you'd find the config example for WG VPN.
The steps are illustrated in the controller mode but basically the same as standalone mode.
How to Configure WireGuard VPN on Omada Controller
https://www.tp-link.com/en/search/?q=wireguard
- Copy Link
- Report Inappropriate Content
Hi @Costy66
Thanks for posting in our business forum.
Use the label and tag, Wireguard and Configuration, you'd find the config example for WG VPN.
The steps are illustrated in the controller mode but basically the same as standalone mode.
How to Configure WireGuard VPN on Omada Controller
https://www.tp-link.com/en/search/?q=wireguard
- Copy Link
- Report Inappropriate Content
@Clive_A Thank you for moral support.
That link made me discover this forum and I also checked many other links from the web that I thought it will help me.
After some hours of trial and error I completed my configuration.
So I can answer my own question now :)
Yes it works to configure tl-wr1502x both as a tunnel end and also as a client for a Wireguard VPN with ER7206 at the other end.
I keep it only as a client, I tested it and it works like a charm.
I only need to find a solution to use DDNS instead of IPs.
Thanks again
- Copy Link
- Report Inappropriate Content
Hi @Costy66
Thanks for posting in our business forum.
Costy66 wrote
@Clive_A Thank you for moral support.
That link made me discover this forum and I also checked many other links from the web that I thought it will help me.
After some hours of trial and error I completed my configuration.
So I can answer my own question now :)
Yes it works to configure tl-wr1502x both as a tunnel end and also as a client for a Wireguard VPN with ER7206 at the other end.
I keep it only as a client, I tested it and it works like a charm.
I only need to find a solution to use DDNS instead of IPs.
Thanks again
The domain name support in Endpoint is scheduled to be available in V5.15.X.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 270
Replies: 3
Voters 0
No one has voted for it yet.