Home

Forums

Stories

Knowledge Base

Business Community > SOHO Switches > Tl-sg1005d cannot hold the network cable.

< SOHO Switches

Tl-sg1005d cannot hold the network cable.

NinhPH

2024-09-24 13:45:53 - last edited 2024-09-25 02:21:22

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-09-24

Tl-sg1005d cannot hold the network cable.

2024-09-24 13:45:53 - last edited 2024-09-25 02:21:22

Model: TL-SG1005D

Hardware Version:

Firmware Version:

Tl-sg1005d cannot hold the network cable. Gently touching the network wire will cause the network head to slip out of the switch.

Sorry for my bad English

1 Accepted Solution

Clive_A

2024-09-25 02:21:18 - last edited 2024-09-25 02:21:22

Posts: 5628

Helpful: 2696

Solutions: 1268

Stories: 0

Registered: 2023-06-09

Re:Tl-sg1005d cannot hold the network cable.-Solution

2024-09-25 02:21:18 - last edited 2024-09-25 02:21:22

Hi @NinhPH

Thanks for posting in our business forum.

Ethernet cable plug should have the click which holds the cable into the Ethernet port.

If your cable got a broken click to jam it, then you have a loose connection.

I think that's your case. Not the problem with the switch itself. The Ethernet jack on the switch is standard.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Recommended Solution

1 Reply

Clive_A

2024-09-25 02:21:18 - last edited 2024-09-25 02:21:22

Posts: 5628

Helpful: 2696

Solutions: 1268

Stories: 0

Registered: 2023-06-09

Re:Tl-sg1005d cannot hold the network cable.-Solution

2024-09-25 02:21:18 - last edited 2024-09-25 02:21:22

Hi @NinhPH

Thanks for posting in our business forum.

Ethernet cable plug should have the click which holds the cable into the Ethernet port.

If your cable got a broken click to jam it, then you have a loose connection.

I think that's your case. Not the problem with the switch itself. The Ethernet jack on the switch is standard.

Tl-sg1005d cannot hold the network cable.

Tl-sg1005d cannot hold the network cable.

Information

Voters 0

Tags