Configuring ER7212PC to enable VoIP phones

Configuring ER7212PC to enable VoIP phones

Configuring ER7212PC to enable VoIP phones
Configuring ER7212PC to enable VoIP phones
2024-10-03 15:10:58 - last edited 2024-10-04 04:04:07
Model: ER7212PC  
Hardware Version: V1
Firmware Version: 1.0.3 Build 20230314 Rel.21018

Hello.

 

Does the ER7212PC need to be configured to allow voice traffic when VoIP phones are installed? Aside from forwarding the necessary ports and disabling SIP ALG I'm unsure if anything else needs to be done.

 

I read one thread about configuring a Tagged Network and then enabling LLDP-MED but it was relating to prioritizing voice traffic.

 

Right now the phone says "This call was rejected by the server" when making an outbound call. For inbound calling the phone doesn't ring, it just beeps twice and the hangs up. I don't know if it's a router issue or a phone system issue. Someone else is configuring the phone system itself, I haven't looked at it at all.

 

 

Regards, Dave

  0      
  0      
#1
Options
1 Accepted Solution
Re:Configuring ER7212PC to enable VoIP phones-Solution
2024-10-03 18:44:18 - last edited 2024-10-04 04:04:07

Problem resolved: It appears as though it was a phone system configuration issue after all. Nothing to do with the router.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Configuring ER7212PC to enable VoIP phones-Solution
2024-10-03 18:44:18 - last edited 2024-10-04 04:04:07

Problem resolved: It appears as though it was a phone system configuration issue after all. Nothing to do with the router.

Recommended Solution
  0  
  0  
#2
Options