Early Access Omada SDN Controller_V5.15.6.4 Pre-Release Firmware(Released on Oct 18th, 2024)
This Article Applies to
Omada_SDN_Controller_v5.15.6.4 Windows (Windows 7/8/10/11/Server, 64bit Recommended)
Omada_SDN_Controller_v5.15.6.4_linux_x64.tar
Omada_SDN_Controller_v5.15.6.4_linux_x64.deb
Overview
We hope to offer you a chance to experience the new features added in the Controller v5.15.6.4 in advance, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release. All feedback is welcome, including letting us know about successful upgrades.
Release Notes
New Features
1. Added support for Gateways: DR3650v, ER703WP-4G-Outdoor.
2. Added support for APs: EAP775-Wall, EAP625GP-Wall, EAP115-Bridge v2.0, EAP211-Bridge v2.0, EAP215-Bridge v2.0.
3. Added support to disable ports in the properties window of device.
4. Added support for batch import and export of Radius users in Site View > Settings > Network > Profile > RADIUS Profile > RADIUS Users.
5. Added support to configure DSL Gateway features in Site View > Settings > Wired&Wireless Networks > WAN Mode:
- Virtual WAN
- VoIP
- DSL Dialing
- TP-link DDNS
Enhancements
1. Optimized NAT Configuration, limit the entries of NAT according to Alias IP.
2. Optimized WLAN Optimization, added support to deploy Channel Width and Channel.
3. Optimized properties window, added support for Loopback Detection in Device > Properties window > Config > Services > Loopback Control.
4. Optimized the following features in Omada App:
- Added support for NTP configuration.
- Added support for Static Routing.
- Optimized properties window of the device
Notes
1. This version of the Controller is fully applied to the Omada APP of version 4.20 or above.
2. Omada SDN Controller can only manage certain devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.
3. Since version 5.14.32.2, Omada Software Controller no longer supports upgrade from Controller v4.
4. Since version 5.14.32.2, Omada Software Controller(windows) only supports installation on Windows64-bit platform.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.
(3) You may follow the following guide to upgrade your Omada Controller. How to Upgrade or Downgrade Omada SDN Controller.
Firmware Download Link
-
Direct Download
Omada_SDN_Controller_v5.15.6.4_pre-release_windows
Omada_SDN_Controller_v5.15.6.4_pre-release_linux_x64_deb
Omada_SDN_Controller_v5.15.6.4_pre-release_x64_tar.gz
Additional Information
If somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:
- Omada Controller version (previous and current)
- Device Model(s), Hardware and Firmware versions
- (if possible) A copy of the Log file and Backup Config file
If you decide to downgrade the controller before reporting the issue to TP-Link, it's suggested to save a copy of the current Log file and Backup Config file before you do that, which could help to investigate and address the issue quickly.
>> How to get the Log file and Backup Config file for Omada SDN Controller:
-
If your Windows software controller failed to get launched, please locate the controller installation path for the Log file.
-
If it's not a launch issue, you can export the Log file and Backup Config file in the local network.
-
For Omada Controller v5.8 or later version,
In the Global View, go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.
-
For Omada Controller v5.6 or v5.7,
Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file. On the same page, scroll down for Export for Support, click Export Running Logs for desensitized Log file.
-
For Omada Controller v5.5 or previous version,
Go to Settings > Maintenance > Backup & Restore > Retained Data Backup, select Settings Only, then click Export for the Backup Config file . Go to Settings > Services > Export Data > Running Log to export the Log file.
-
Recommended Threads
TP-Link Early Access Program Is Now Available!
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Get the Latest Firmware Releases for Omada Routers Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Vincent-TP wrote
hi， it's a gateway's function. Let's wait for gateway updates. :)
how about the anti tethering feature?
- Copy Link
- Report Inappropriate Content
I don't know if its the new router Firmware (ER707-M2 -> 1.2.3) or a controller issue (running on Linux).
After a reboot of the whole system, the DHCP reservation list is not working. All my devices are getting "fresh" IPs.
EDIT: I think i found my selfmade issue. My DHCP range includes the range in which the fixed IPs from the DHCP reservation list are located. After resetting the range, the DHCP gave my clients the entered fixed IPs. Hm... Is that intended that i cant reserve an IP that is a DHCP range?
- Copy Link
- Report Inappropriate Content
New Omada cloud UI just copycat Rujie. Why don't use back old design which provide simply and clear view?
- Copy Link
- Report Inappropriate Content
Is there a beta or early release for OC200/300 as of yet to test out? Need to use and test out portforwarding same ports to multiple IP addresses.
Cheers
Eff
- Copy Link
- Report Inappropriate Content
Is there a possibility to change language of the new UI? I can not find it after controller upgrade
- Copy Link
- Report Inappropriate Content
@Shoresy I am using all Omada equipment in my case and have the same problem. Nobody has replied from Tp-link yet with any kind of resolution to this and more and more people are running in to it... hopefully they address this soon.
- Copy Link
- Report Inappropriate Content
OrangeStreet wrote
@Shoresy I am using all Omada equipment in my case and have the same problem. Nobody has replied from Tp-link yet with any kind of resolution to this and more and more people are running in to it... hopefully they address this soon.
@OrangeStreet I know Cloud access works from 5.15.6.4 because I had it working on a new Omada Controller (Windows) until I restored from backup and rebooted the Windows PC after applying some Windows updates, then Cloud access went to a "Disconnected" state with the slider grayed out and I haven't been able to force it on anywhere. It prevents the Controller from showing up within the Omada mobile app as well. Hope it's fixed asap.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thanks for the reply. Do you have any idea when it maybe release for Hardware controller?
Cheers
Eff
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 10009
Replies: 78
Voters 1
