Business Community > Routers > Changing Site Network
< Routers

Changing Site Network

Changing Site Network

Changing Site Network
Changing Site Network
2024-11-15 10:03:46 - last edited 2024-11-18 02:52:55
Model: ER7212PC  
Hardware Version: V1
Firmware Version:

Hi All,

     I have successfully installed an ER7212PC with 2 EAP613. Now I need to change the internal LAN address from 192.168.1.0 to 192.168.88.0

 

     What is the best way to perform this network change?

 

 

Kind regards

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Changing Site Network-Solution
2024-11-15 11:11:35 - last edited 2024-11-18 02:52:58

  @Luigi888 

 

 

just change the ip

 

Recommended Solution
  1  
  1  
#2
Options
Re:Changing Site Network-Solution
2024-11-18 02:52:50 - last edited 2024-11-18 02:52:55

Hi @Luigi888 

Thanks for posting in our business forum.

There is no best way to do it. As MR.S stated, all you need to do is to change the LAN network IP to a new one.

 

If the adopted devices do not work well, you may restart them so as to get a new DHCP IP address. They'll work afterward.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#3
Options
2 Reply
Re:Changing Site Network-Solution
2024-11-15 11:11:35 - last edited 2024-11-18 02:52:58

  @Luigi888 

 

 

just change the ip

 

Recommended Solution
  1  
  1  
#2
Options
Re:Changing Site Network-Solution
2024-11-18 02:52:50 - last edited 2024-11-18 02:52:55

Hi @Luigi888 

Thanks for posting in our business forum.

There is no best way to do it. As MR.S stated, all you need to do is to change the LAN network IP to a new one.

 

If the adopted devices do not work well, you may restart them so as to get a new DHCP IP address. They'll work afterward.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#3
Options

Information

Helpful: 0

Views: 110

Replies: 2

Related Articles
ER7212PC - Can it be configured to use both a client to site VPN and a site to site VPN
237 0
How to connect two ER7212PC togther with site to site VPN
370 1
Site-To-Site VPN: Tunnel UP, but no traffic being routed.
500 0
Migrate 'Site' from Controller on ER7212PC to OC300
318 0
Site to Site to Site
979 0
 Migration of oc200 site to ER7212PC
2857 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.