total hop limit maximum
please remove total hop maximum limit. in one school the connection is slow because of this. because I have almost 10 Ap eap225 per school. but it cannot connect to recommended bcos of hop reach the maximum limit
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @papa_sau30
In a mesh network, the number of hops can significantly impact performance. Each hop introduces some latency and a reduction in throughput due to the need to re - transmit and manage the signal. When you have almost 10 APs and the maximum hop limit is reached, it's likely that the signal has to travel through too many intermediate APs to reach its destination. It's a safeguard to prevent the network from becoming too complex and unreliable due to an excessive number of intermediate nodes.
If possible, use wired connections (such as Ethernet cables) for some of the access points to reduce the reliance on the mesh network. This can effectively bypass the hop - limit problem for those APs. You can connect the APs directly to the school's wired network infrastructure, such as a switch, and configure them to use the wired backhaul option.
- Copy Link
- Report Inappropriate Content
@Vincent-TP I need the solution to remove the total exceed the limit. because we have some Ap need to mesh from AP to another. but it's show total exceed the limit and connect it to far away AP and then the signal or internet is too weak
- Copy Link
- Report Inappropriate Content
Hi @papa_sau30
In a mesh network, the number of hops can significantly impact performance. Each hop introduces some latency and a reduction in throughput due to the need to re - transmit and manage the signal. When you have almost 10 APs and the maximum hop limit is reached, it's likely that the signal has to travel through too many intermediate APs to reach its destination. It's a safeguard to prevent the network from becoming too complex and unreliable due to an excessive number of intermediate nodes.
If possible, use wired connections (such as Ethernet cables) for some of the access points to reduce the reliance on the mesh network. This can effectively bypass the hop - limit problem for those APs. You can connect the APs directly to the school's wired network infrastructure, such as a switch, and configure them to use the wired backhaul option.
- Copy Link
- Report Inappropriate Content
@Vincent-TP I need the solution to remove the total exceed the limit. because we have some Ap need to mesh from AP to another. but it's show total exceed the limit and connect it to far away AP and then the signal or internet is too weak
- Copy Link
- Report Inappropriate Content
Hi @papa_sau30
As I mentioned, this is not recommended, and the total hot is 4.
You can share the topology of your network with me, I will provide a recommendation accordingly.
- Copy Link
- Report Inappropriate Content
@Vincent-TP please do a solution to remove to the total hop in the mesh network
- Copy Link
- Report Inappropriate Content
Hi @papa_sau30
Unfortunately, this restriction cannot be removed, as it's necessary to ensure the most basic wireless network connectivity. Additional hops would render the wireless network virtually unusable.
papa_sau30 wrote
@Vincent-TP please do a solution to remove to the total hop in the mesh network
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 608
Replies: 5
Voters 0
No one has voted for it yet.