DHCP VLAN Relay Not Giving Correct Scope

DHCP VLAN Relay Not Giving Correct Scope

DHCP VLAN Relay Not Giving Correct Scope
DHCP VLAN Relay Not Giving Correct Scope
2024-11-21 03:36:47 - last edited Friday

Hello,

 

I have an issue with DHCP Relay for VLANS, basically the DHCP server is giving an IP from the switch vlan scope instead of the other vlan, I have followed this guide: https://www.tp-link.com/us/support/faq/4009/ and I have the switch running with an omada controller.

 

If I setup an IP for the client vlan on the switch, I have no problem the DHCP server get the request from the switch with the IP of the client VLAN and gives the IP from that scope.

 

I'm not sure if I'm missing something

 

P.S. Sorry for my bad english

  0      
  0      
#1
Options
1 Accepted Solution
Re:DHCP VLAN Relay Not Giving Correct Scope-Solution
2024-11-21 09:18:18 - last edited Friday

Hi  @UMB8998 

 

To better understand the issue, please let us know the following info:

1. The model number, hardware version, and firmware version of your switch;

2. The type of the controller you are using, the firmware version of the controller;

3. The topology of your network;

4. Some screenshots of the DHCP VLAN Relay configuration.

5. Which IP address are the DHCP clients get?

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:DHCP VLAN Relay Not Giving Correct Scope-Solution
2024-11-21 09:18:18 - last edited Friday

Hi  @UMB8998 

 

To better understand the issue, please let us know the following info:

1. The model number, hardware version, and firmware version of your switch;

2. The type of the controller you are using, the firmware version of the controller;

3. The topology of your network;

4. Some screenshots of the DHCP VLAN Relay configuration.

5. Which IP address are the DHCP clients get?

Recommended Solution
  0  
  0  
#2
Options