Home

Forums

Stories

Knowledge Base

Business Community > Switches > SG3210X-M2 - After Firmware-Update to 1.0.5 (and Reboot), Switch is Disconnected

< Switches

SG3210X-M2 - After Firmware-Update to 1.0.5 (and Reboot), Switch is Disconnected

NeoMorpheus

Saturday - last edited Saturday

Posts: 10

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2022-08-20

SG3210X-M2 - After Firmware-Update to 1.0.5 (and Reboot), Switch is Disconnected

Saturday - last edited Saturday

Tags: #Firmware Update #Controller Related

Model: TL-SG3210

Hardware Version: V1

Firmware Version: 1.0.5

Hello,

today was the Firmware-Update-Day in my Omada-Network. For my SG3210X-M2 V1 Switch was the newest Firmware-Version 1.0.5 (previous Firmware was 1.0.3). The Firmware-Update Start was proceeded by me. After 5 Minutes the State on Omada-Hardware-Controller (OC200) was furthermore on "Upgrading". I received the Firmware-Upgrade-Failure-Message. Next step was the manual reboot of the Switch and the Device running great.

The SG3210X-M2 itself is connected via LAN-cable with the SG3218XP-M2 V1, which is my Main-Switch. In the Device list on Omada Controller the SG3210X-M2 is displayed with disconnected. The only Workaround is to unplug the LAN-Cable to the SG3210X-M2 und reinsert the LAN-cable. Then the SG3210X-M2 will be readopted.

Best regards

3 Reply

Clive_A

Yesterday

Posts: 5673

Helpful: 2723

Solutions: 1277

Stories: 0

Registered: 2023-06-09

Re:SG3210X-M2 - After Firmware-Update to 1.0.5 (and Reboot), Switch is Disconnected

Yesterday

Hi @NeoMorpheus

Thanks for posting in our business forum.

If it fails to get an IP, it displays as disconnected.

Reboot or replug the cable would fix it.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

NeoMorpheus

LV1

Yesterday

Posts: 10

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2022-08-20

Re:SG3210X-M2 - After Firmware-Update to 1.0.5 (and Reboot), Switch is Disconnected

Yesterday

@Clive_A

The SG3210X-M.2 is configurated with a static IPv4-Address. On every reboot the Switch will be displayed with disconnected anyway. With Firmware-Version 1.0.3 this issue was not happen.

Clive_A

12 hours ago

Posts: 5673

Helpful: 2723

Solutions: 1277

Stories: 0

Registered: 2023-06-09

Re:SG3210X-M2 - After Firmware-Update to 1.0.5 (and Reboot), Switch is Disconnected

12 hours ago

Hi @NeoMorpheus

Thanks for posting in our business forum.

NeoMorpheus wrote

@Clive_A

The SG3210X-M.2 is configurated with a static IPv4-Address. On every reboot the Switch will be displayed with disconnected anyway. With Firmware-Version 1.0.3 this issue was not happen.

The controller is in the same subnet?

But if did not adopt it, the config does not sync to the switch. It might not properly work before being adopted and synced.

As you said it is on a static IP, you can still log in to it via CLI and recover the backup and see if it can work.

SG3210X-M2 - After Firmware-Update to 1.0.5 (and Reboot), Switch is Disconnected

SG3210X-M2 - After Firmware-Update to 1.0.5 (and Reboot), Switch is Disconnected

Information

Voters 0

Tags