Procedure if I need to replace the ER8411 router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Procedure if I need to replace the ER8411 router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Procedure if I need to replace the ER8411 router
Procedure if I need to replace the ER8411 router
2024-11-28 23:46:31 - last edited 2024-11-29 02:03:08
Model: ER8411  
Hardware Version: V1
Firmware Version: 1.2.2

Hi there!

I have a network with my ER8411 router and a couple of switches. Since Omada is not allowing us to add a secondary router for DR. My concern is what should I do if I lose my ER8411 and have another ER7206 ready to be installed? how can I be sure I am not losing all the configuration?. I am using a Controller OC300.

Thanks in advance.

Alex

  0      
  0      
#1
Options
1 Accepted Solution
Re:Procedure if I need to replace the ER8411 router-Solution
2024-11-29 02:03:05 - last edited 2024-11-29 02:03:08

Hi @Alex-Argentina 

Thanks for posting in our business forum.

The configs are stored on the controller. What you configure syncs to the routers.

All you need to do is the WAN config which you select either the correct model and migrate the ports, or you set it as Universal.

Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Procedure if I need to replace the ER8411 router-Solution
2024-11-29 02:03:05 - last edited 2024-11-29 02:03:08

Hi @Alex-Argentina 

Thanks for posting in our business forum.

The configs are stored on the controller. What you configure syncs to the routers.

All you need to do is the WAN config which you select either the correct model and migrate the ports, or you set it as Universal.

Recommended Solution
  1  
  1  
#2
Options