ER605 restarts itself when it deals with heavy traffic
ER605 restarts itself when it deals with heavy traffic
It's bit weird here. It looks my ER 605 will restart itself when it has heavy traffic for upload and download, such as when using bittorrent software.
And with the restart, all logs are lost and no trace to see what it really happened.
I tried this several times, and with the bittorrent software running for a few mins, it's very likely the router will crash and restart itself.
I can see CPU is not running even at 100% before it crashes. Please advise what might be the root cause? It's weird the router will restart, if it's just stuck for a few mins, it's still much better, right? Thank you and any idea will be helpful.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Do you have any specific configuration? Like ACLs, VLANs, traffic filtering?
Do you use is in Standalone Mode or with Omada Controller?
Is it only BitTorrent that makes this problem or other things (like 4k YouTube videos, FTP download, other) as well?
- Copy Link
- Report Inappropriate Content
@RaRu thanks for this.
I am not using ACL, VLAN or any special filtering on this router.
I turned on bandwidth control just to check if it would help, but it still crashes.
I am using PPPOE to connect to the internet via ER605 with both IPV4 and IPV6 enabled. It's only for one WAN, so no load balance either.
For system management, I use standard alone mode, so no omada controller here. So far the issue is only with bittorrent, other online videos are still working fine.
Below ER605, i have AP configured for wifi connection, by the way. Thanks.
- Copy Link
- Report Inappropriate Content
By the way, I also use VPN features on this router, including ikev2, OpenVPN and WireGuard. Of course, there is no VPN connection before the crash.
DHCP is enabled, but that machine running BitTorrent is setup with static IP address only. Hope this helps to clarify my current setup.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @JohnXu
Thanks for posting in our business forum.
JohnXu wrote
By the way, I also use VPN features on this router, including ikev2, OpenVPN and WireGuard. Of course, there is no VPN connection before the crash.
DHCP is enabled, but that machine running BitTorrent is setup with static IP address only. Hope this helps to clarify my current setup.
You have a VPN but they do not connect. So basically this means it does not interfere with the system.
See a known issue:
Solution to WireGuard VPN Crashes and Reboots on Connection
If you can confirm that the VPN is not affecting this, only, only the P2P download crashes the router, regardless of what kind of P2P software you use, it crashes the router, try the session limit and see if there is an improvement.
For the max concurrent session of this router, see the product specs.
If this issue persists, let me know
- Copy Link
- Report Inappropriate Content
Thanks for this.
It looks it's said on the webpage, ER605 concurrent session is like 150,000, that's really a big number.
I enabled the session limit and can see it's only about a few thousands in the session monitor screen for the computer running bittorrent.
Just wondering if they are with the same session number concept, or I mis-understood here.
It looks like if the session goes into something like 3000 thousands, it will already make the router unstable. But if the max number is around 150,000, then a few thousands is still at very low amount. Thoughts?
- Copy Link
- Report Inappropriate Content
Hi @JohnXu
Thanks for posting in our business forum.
JohnXu wrote
Thanks for this.
It looks it's said on the webpage, ER605 concurrent session is like 150,000, that's really a big number.
I enabled the session limit and can see it's only about a few thousands in the session monitor screen for the computer running bittorrent.
Just wondering if they are with the same session number concept, or I mis-understood here.
It looks like if the session goes into something like 3000 thousands, it will already make the router unstable. But if the max number is around 150,000, then a few thousands is still at very low amount. Thoughts?
Cause it is a P2P download which takes many resources of the switch.
3,000 concurrent sessions which means 3,000 sessions to download mini packets.
3,000 sessions for regular web browsing(which may not use that many sessions and maintain that high throughput for a long time) does not affect the router's stability or performance.
Also, what's the P2P speed when you have 3,000 sessions as the threshold?
- Copy Link
- Report Inappropriate Content
with 3000 session limit, the P2P software can still download at max speed of the network, that's around 300Mb. Anyway, I don't have a high network speed here, so I assume ER605 shall be enough to handle it.
And it normally won't crash after the restart, even using the BitTorrent download. But it will easily crash if the router has been running for a day or two.
- Copy Link
- Report Inappropriate Content
Hi @JohnXu
Thanks for posting in our business forum.
JohnXu wrote
with 3000 session limit, the P2P software can still download at max speed of the network, that's around 300Mb. Anyway, I don't have a high network speed here, so I assume ER605 shall be enough to handle it.
And it normally won't crash after the restart, even using the BitTorrent download. But it will easily crash if the router has been running for a day or two.
I think we might need a remote session with you if you describe it as so.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 324
Replies: 15
Voters 0
No one has voted for it yet.