Omada ignores static routes?
I have a functioning omada setup with gateway switch and eap. For security reasons som IPs must be routed through an extra gateway. So I set up a static route let's say
192.168.3.0/24 next hp 192.168.100.220
But when I traceroute for example 192.168.3.4 then next hop is the address of the gateway and it doesn't hop to 192.168.100.220 at all. Only ***. It seems like it's ignoring all my static routes.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @MVZ_MUDr_C
Thanks for posting in our business forum.
Not enough information for diagnosis.
What have you done to verify that *** is not the firewall you defined? Wireshark? Traffic monitor on that firewall?
Without that static route, what are the differences between the route you had and now with the static routing?
Aint you suppose to traceroute the external network like 8.8.8.8?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @MVZ_MUDr_C
Thanks for posting in our business forum.
Not enough information for diagnosis.
What have you done to verify that *** is not the firewall you defined? Wireshark? Traffic monitor on that firewall?
Without that static route, what are the differences between the route you had and now with the static routing?
Aint you suppose to traceroute the external network like 8.8.8.8?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 113
Replies: 2
Voters 0
No one has voted for it yet.