ER605 blocking ports over site to site VPN
I have opened ports for SIP and it's working fine but to connect to phone box from one side to the other appears to be blocking ports.
I assumed all ports would be open over the VPN?
Do I have to open the ports on VPN WANs on both sides?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @MMarkus
Thanks for posting in our business forum.
If IP works, ping, then it means layers 2 and 3 work. Then it is not a problem with the tunnel or the router as it creates the tunnel and gets you working with layers 2 and 3.
Consider the firewall on the system or a config issue on the phone system.
Port isn't on layers 2 and 3.
- Copy Link
- Report Inappropriate Content
@Clive_A Thanks for the help-
I followed your excellent help article to open ports in the firewall and then close everything with a higher ID #
The mystery is that if I turn off that rule I can connect fine-
- Copy Link
- Report Inappropriate Content
Hi @MMarkus
Thanks for posting in our business forum.
If IP works, ping, then it means layers 2 and 3 work. Then it is not a problem with the tunnel or the router as it creates the tunnel and gets you working with layers 2 and 3.
Consider the firewall on the system or a config issue on the phone system.
Port isn't on layers 2 and 3.
- Copy Link
- Report Inappropriate Content
@Clive_A Thanks for the help-
I followed your excellent help article to open ports in the firewall and then close everything with a higher ID #
The mystery is that if I turn off that rule I can connect fine-
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 125
Replies: 2
Voters 0
No one has voted for it yet.