Hi everyone.

I'm having difficulty getting the following situation to work:

I have a TL SG2428P switch, that is configured trough the webinterface, because when I adopted it in the Omada configuration, I found it a bit too difficult to get all my WLAN settings configured. When I did this with the built-in web interface, it worked easier for me.

On the switch I have configured port 21 as a untagged trunk port with Vlans 1(management), 20 (Lan), 60 (IOT) and 99 (Guest). I also have tried to set the port to tagged, but this also didn't work.

When I connect the EAP225 to this trunk port, the omada controller doesn't find the AP, when I connect it to a lan port directly it does. When I then, after configuring the AP WLAN SSID's, try to connect it to the trunk port, It just doesn't seem to work, I get the SSID's in my wireless device, but I don't get a IP from the DHCP server in that selected WLAN range

(10.10.10.x - 10.10.20.x - 10.10.60.x - 10.10.99.x)

Do I actually have to have the switches adopted in the omada controller for this to work? Am I missing something else?

If anyone needs more information, happy to oblige.