Beta Software EAP783_V1_1.1.92 Beta Firmware (Update on 23th May, 2025)
This Article Applies to: EAP783_V1 Fully Adapted to Omada SDN Controller v5.14 or above
Release Notes:
New Features/Enhancements:
1. Supports displaying Configuration Result.
2. Supports cluster deployment in Controller mode (CBC does not support).
3. Supports Radius Proxy.
4. Supports OWE.
5. Supports custom Channel Range.
6. Supports upgrading firmware through cloud in Standalone mode.
7. Supports Portal Logout.
8. Supports disabling HTTP protocol in Standalone mode.
9. Supports DHCP Option43.
10. Supports multiple Radius Servers for MAC-Based Authentication.
11. Supports configuring NAS ID with WPA-Enterprise encryption.
12. Supports DNS Queries.
13. Supports configuring Rate Limit with Portal in Controller mode.
14. Supports configuring the Device Name in Controller mode, which can be carried in LLDP/SNMP/DHCP interaction.
15. Supports viewing status information and making some simple configuration through Standalone management page when the EAP is managed by the Controller and disconnected with Controller currently.
16. Supports displaying the maximum associated clients based on the EAP model in Controller mode.
17. Supports displaying the radio bandwidth of the EAP in Controller mode.
18. Supports configuring wireless mode in Controller mode.
19. Supports statistics of Multicast/Broadcast packets.
20. Supports 1024 PPSK entries.
21. Supports 802.11 a/n mixed in 5G.
22. Supports Non-stick Roaming function.
23. Supports authentication type of EKMS and Generic Radius with Unbound MAC for PPSK with Radius.
24. Supports Multicast Filtering with IPv6 address.
25. Supports reporting default OFDMA status.
26. Supports MAC Filter with 2000 entries per MAC Group profile.
27. Support DNS adoption.
28. Supports Multicast/Broadcast Rate Limit.
29. Enhances security protection.
30. Improves stability.
31. Improves support for more SSH commands.
32. Optimizes Automatic Power Optimization function.
33. Optimizes the configuration of Beacon Interval.
34. Optimizes roaming function.
35. Optimizes logs displayed in Controller.
Bug Fixed:
1. Fixed the issue that RSSI information display error in WLAN Optimization.
2. Fixed the issue about LLDP-MED packet forwarding exception.
3. Fixed the issue that URL Filtering cannot work properly when TLS1.3 is enabled in the browser.
4. Fixed the issue that HTTPS Redirection and Pre-Authentication Access don’t take effect in some special scenarios.
5. Fixed the reboot issue of EAP when client try connecting tri-band MLO SSID.
Notes:
1. This version of firmware is applied to the Omada APP v4.17 or above.
Beta Firmware Download
Attention
Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
EAP783_v1_1.1.92_Build_20250507(Beta)
EAP783_v1_1.1.90_Build_20250115(Beta)
Notes:
(1) The above firmware is applied to EAP783 V1.
(2) Your device’s configuration won’t be lost after upgrading.
(3) The above firmware is fully adapted to Omada SDN Controller v5.14 and above
Update Log
23th May, 2025
Provide the beta link for EAP783_1.1.92:
EAP783_v1_1.1.92_Build_20250507(Beta)
18th Mar, 2025
Update the release note.
17th Jan, 2025
Provide the download link:
EAP783_v1_1.1.90_Build_20250115(Beta)
Feedback
Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:
- Management mode (Controller or Standalone)
- Device Model(s) and Hardware
- Device Firmware (previous and current)
Thank you in advance for your great cooperation and support.
Recommended Threads
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada EAP Related Issues [Constantly Updated]
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
then you need to be able to replicate the issue with an other device in order to prove its not an issue with your current testing device.
- Copy Link
- Report Inappropriate Content
@b101 yes I already did.
similar issue on another macbook and another iphone. Work fine if I power cycle the AP but issue is back after 15-30min
- Copy Link
- Report Inappropriate Content
i dunno man. i dont have such issues. if you flash back last official FW, does it behave differently? if its still the same thing, can you try a non apple device?
edit:
is the wifi ssid you are testing with, on the same subset or vlan than your Lan tests?
- Copy Link
- Report Inappropriate Content
Hi @tonybui
Work fine if I power cycle the AP but issue is back after 15-30min
>>> It appears that performance degrades over time with usage.
If it's convenient for you, I recommend referring to the following link to conduct an iperf speed test.
How to use iPerf to test the speed between the EAP and the wireless client
BTW, to ensure a more efficient and focused discussion on your case, please consider creating a new thread. Thank you.
- Copy Link
- Report Inappropriate Content
It has been half a year since the release of the beta firmware. When will the official firmware be released?
Also, I have a question: When an SSID configured for MLO is shared with Wi-Fi 6 or 6E devices, my Wi-Fi 7-compatible iPhone 16 only connects using the 6GHz band. However, when I connect the iPhone 16 to an SSID dedicated exclusively to MLO, it connects via MLO using all three bands. Is this behavior by design?
- Copy Link
- Report Inappropriate Content
Hi @JIN_JPN
It should be available soon. Recently, we've been addressing the connectivity issues reported by users.
To avoid any misunderstanding,could you please share with us the SSID config under the two mentioned situation?
- Copy Link
- Report Inappropriate Content
@Vincent-TP
So far so good on the potential fix 1.1.92 version. No disconnection events to report after two weeks of uptime.
As a side note, I have a Reolink wifi doorbell camera that until 1.1.9x would constantly be unaccessible. The upgrade to 1.1.9x has made it 100%, always accessible all the time. It's connected on a dedicated SSID for IoT, connected on 5GHz.
Glad that the connectivity issues for that are greatly improved with the firmware upgrade.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
is there an internal new Beta (like 1.1.91)?
i have also connection drops with my device and this Version (1.1.90) and my wife is not happy with it :D
- Copy Link
- Report Inappropriate Content
Hi @Matt_cgn
I had messaged the new link to you. Please update it to see if that helps.
If anything new comes, don't hesitate to let us know.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 10493
Replies: 126
Voters 2
