Beta Software EAP783_V1_1.1.92 Beta Firmware (Update on 23th May, 2025)

This Article Applies to: EAP783_V1 Fully Adapted to Omada SDN Controller v5.14 or above
Release Notes:
New Features/Enhancements:
1. Supports displaying Configuration Result.
2. Supports cluster deployment in Controller mode (CBC does not support).
3. Supports Radius Proxy.
4. Supports OWE.
5. Supports custom Channel Range.
6. Supports upgrading firmware through cloud in Standalone mode.
7. Supports Portal Logout.
8. Supports disabling HTTP protocol in Standalone mode.
9. Supports DHCP Option43.
10. Supports multiple Radius Servers for MAC-Based Authentication.
11. Supports configuring NAS ID with WPA-Enterprise encryption.
12. Supports DNS Queries.
13. Supports configuring Rate Limit with Portal in Controller mode.
14. Supports configuring the Device Name in Controller mode, which can be carried in LLDP/SNMP/DHCP interaction.
15. Supports viewing status information and making some simple configuration through Standalone management page when the EAP is managed by the Controller and disconnected with Controller currently.
16. Supports displaying the maximum associated clients based on the EAP model in Controller mode.
17. Supports displaying the radio bandwidth of the EAP in Controller mode.
18. Supports configuring wireless mode in Controller mode.
19. Supports statistics of Multicast/Broadcast packets.
20. Supports 1024 PPSK entries.
21. Supports 802.11 a/n mixed in 5G.
22. Supports Non-stick Roaming function.
23. Supports authentication type of EKMS and Generic Radius with Unbound MAC for PPSK with Radius.
24. Supports Multicast Filtering with IPv6 address.
25. Supports reporting default OFDMA status.
26. Supports MAC Filter with 2000 entries per MAC Group profile.
27. Support DNS adoption.
28. Supports Multicast/Broadcast Rate Limit.
29. Enhances security protection.
30. Improves stability.
31. Improves support for more SSH commands.
32. Optimizes Automatic Power Optimization function.
33. Optimizes the configuration of Beacon Interval.
34. Optimizes roaming function.
35. Optimizes logs displayed in Controller.
Bug Fixed:
1. Fixed the issue that RSSI information display error in WLAN Optimization.
2. Fixed the issue about LLDP-MED packet forwarding exception.
3. Fixed the issue that URL Filtering cannot work properly when TLS1.3 is enabled in the browser.
4. Fixed the issue that HTTPS Redirection and Pre-Authentication Access don’t take effect in some special scenarios.
5. Fixed the reboot issue of EAP when client try connecting tri-band MLO SSID.
Notes:
1. This version of firmware is applied to the Omada APP v4.17 or above.
Beta Firmware Download
Attention
Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
EAP783_v1_1.1.92_Build_20250507(Beta)
EAP783_v1_1.1.90_Build_20250115(Beta)
Notes:
(1) The above firmware is applied to EAP783 V1.
(2) Your device’s configuration won’t be lost after upgrading.
(3) The above firmware is fully adapted to Omada SDN Controller v5.14 and above
Update Log
23th May, 2025
Provide the beta link for EAP783_1.1.92:
EAP783_v1_1.1.92_Build_20250507(Beta)
18th Mar, 2025
Update the release note.
17th Jan, 2025
Provide the download link:
EAP783_v1_1.1.90_Build_20250115(Beta)
Feedback
Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:
- Management mode (Controller or Standalone)
- Device Model(s) and Hardware
- Device Firmware (previous and current)
Thank you in advance for your great cooperation and support.
Recommended Threads
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada EAP Related Issues [Constantly Updated]
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Vincent-TP Hi, not sure when i can flash a new FW and test, this equipment is curently in production.
- Copy Link
- Report Inappropriate Content
Thank you.
- Copy Link
- Report Inappropriate Content
Vincent-TP wrote
Hi @MrAdministrator @the901 @b101 @mrmbman
Thank you so much for the valued feedback about the intermittent connection issue on the EAP783 beta firmware.
We really concerned about this issue and hope to fix it ASAP.
I had emailed you to collect more debug info, please kindly check your email inbox and search TKID from the email subject.
Looking forward to hear back from you.
I will update to the debug firmware and follow the directions to collect a debug report after a disconnect of my desktop on 6GHz band.
- Copy Link
- Report Inappropriate Content
b101 wrote
@Vincent-TP Hi, not sure when i can flash a new FW and test, this equipment is curently in production.
Understand. Thanks for letting us know.
- Copy Link
- Report Inappropriate Content
Thank you for the reply. Looking forward to your info.
- Copy Link
- Report Inappropriate Content
can anyone try this:
from the 6ghz band/ssid and a compatible device, ping either your gateway/router or the Wifi AP it self.
I was having issues scrubbing through the footage of my tapo camera and also live viewing where it constantly complained of unstable network. I had forgotten that last night, i flashed back the beta/debug version. I decided to ping the camera and was seeing very high fluctuations in latencies.
the camera(C520WS) and my mobile device(galaxy fold 5) were both roughly same distance away from the AP: ~15 feet >> pings are anywhere btween 50 ms to 150ms.
if i switch ssid to a non 6ghz one, i can properly access camera footage and latency is also much better.
Im unsure if on the last stable FW/on the 6ghz band, if this was also an issue.
I did not yet see the wifi cut out from my fold 5 like i had seen previously.
- Copy Link
- Report Inappropriate Content
forgot to post, this is from a 5ghz band ssid. its much better but still a bit high.
- Copy Link
- Report Inappropriate Content
@Vincent-TP I just got an EAP783 and with this beta firmware I am having some weird issue where
Local LAN speedtest (openspeedtest to a sever on local network) -> I can achieve >900Mbps in speed on 6Ghz wifi band (client is a macbook m4 pro wifi6e)
ISP Speedtest (speedtest.net) --> this can on achieve ~600Mbps, sometime it can reach >900Mbps randomly but most of the time ISP speed test on wifi is only around 650Mbps
Do you know of any setting that can cause poor performance on WAN (internet speed test) while it works fine on local net work?
MY ISP speedtest when plugging the cable dirrectly to the laptop can achieve >900Mbps (just to prove that I have 1G internet connection and can achieve that speedtest)
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@b101 It is not my router/firewall as it sometime can achieve >900mbps on wifi (normally after ap reset), on the same laptop if I plugin the network cable I can achieve the max speed
- Copy Link
- Report Inappropriate Content

Information
Helpful: 4
Views: 10478
Replies: 126
Voters 2

