Beta Software EAP783_V1_1.1.92 Beta Firmware (Update on 23th May, 2025)
This Article Applies to: EAP783_V1 Fully Adapted to Omada SDN Controller v5.14 or above
Release Notes:
New Features/Enhancements:
1. Supports displaying Configuration Result.
2. Supports cluster deployment in Controller mode (CBC does not support).
3. Supports Radius Proxy.
4. Supports OWE.
5. Supports custom Channel Range.
6. Supports upgrading firmware through cloud in Standalone mode.
7. Supports Portal Logout.
8. Supports disabling HTTP protocol in Standalone mode.
9. Supports DHCP Option43.
10. Supports multiple Radius Servers for MAC-Based Authentication.
11. Supports configuring NAS ID with WPA-Enterprise encryption.
12. Supports DNS Queries.
13. Supports configuring Rate Limit with Portal in Controller mode.
14. Supports configuring the Device Name in Controller mode, which can be carried in LLDP/SNMP/DHCP interaction.
15. Supports viewing status information and making some simple configuration through Standalone management page when the EAP is managed by the Controller and disconnected with Controller currently.
16. Supports displaying the maximum associated clients based on the EAP model in Controller mode.
17. Supports displaying the radio bandwidth of the EAP in Controller mode.
18. Supports configuring wireless mode in Controller mode.
19. Supports statistics of Multicast/Broadcast packets.
20. Supports 1024 PPSK entries.
21. Supports 802.11 a/n mixed in 5G.
22. Supports Non-stick Roaming function.
23. Supports authentication type of EKMS and Generic Radius with Unbound MAC for PPSK with Radius.
24. Supports Multicast Filtering with IPv6 address.
25. Supports reporting default OFDMA status.
26. Supports MAC Filter with 2000 entries per MAC Group profile.
27. Support DNS adoption.
28. Supports Multicast/Broadcast Rate Limit.
29. Enhances security protection.
30. Improves stability.
31. Improves support for more SSH commands.
32. Optimizes Automatic Power Optimization function.
33. Optimizes the configuration of Beacon Interval.
34. Optimizes roaming function.
35. Optimizes logs displayed in Controller.
Bug Fixed:
1. Fixed the issue that RSSI information display error in WLAN Optimization.
2. Fixed the issue about LLDP-MED packet forwarding exception.
3. Fixed the issue that URL Filtering cannot work properly when TLS1.3 is enabled in the browser.
4. Fixed the issue that HTTPS Redirection and Pre-Authentication Access don’t take effect in some special scenarios.
5. Fixed the reboot issue of EAP when client try connecting tri-band MLO SSID.
Notes:
1. This version of firmware is applied to the Omada APP v4.17 or above.
Beta Firmware Download
Attention
Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
EAP783_v1_1.1.92_Build_20250507(Beta)
EAP783_v1_1.1.90_Build_20250115(Beta)
Notes:
(1) The above firmware is applied to EAP783 V1.
(2) Your device’s configuration won’t be lost after upgrading.
(3) The above firmware is fully adapted to Omada SDN Controller v5.14 and above
Update Log
23th May, 2025
Provide the beta link for EAP783_1.1.92:
EAP783_v1_1.1.92_Build_20250507(Beta)
18th Mar, 2025
Update the release note.
17th Jan, 2025
Provide the download link:
EAP783_v1_1.1.90_Build_20250115(Beta)
Feedback
Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:
- Management mode (Controller or Standalone)
- Device Model(s) and Hardware
- Device Firmware (previous and current)
Thank you in advance for your great cooperation and support.
Recommended Threads
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada EAP Related Issues [Constantly Updated]
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Vincent-TP
Hi Vincent,
May I also have the link to the new beta firmware, to see if it will fix my intermittent internet speed issue
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Thanks!
I have installed the new Version and have to check in the next days if the problems gone :)
regards
Matt
- Copy Link
- Report Inappropriate Content
So far the new beta 1.1.92 works bette but still has some gremlins.
I no longer have to reset my EAPs every few days (at least not after 1.5 weeks or so it's been going on this ver). Before I had to restart my EAPs because my devices would stop connecting. Also my devices WiFi calling has not had issues (before it used to randomly fail and not send in texts or calls).
I have had a few random disconnects while sitting still/not moving around. So not likely roaming related. It pretty quickly reconnects in like 20 seconds. Other devices do not disconnect at same time. happens like 1x a day. Similar to the issue I had with normal stable ver of firmware.
MLO "works" but it says my device is only connected to one band at a time when I look at it on the Omada app. I believe it should show my device is connected to all 3 bands (it used to show that even when MLO did not work on 2.4ghz bug). So maybe still issues with this.
For reference my only WiFi 7 device is my iPhone.
- Copy Link
- Report Inappropriate Content
Hi @mrmbman
Thank you so much for your feedback. Would you please check the email TKID250336684 I sent at 2025-04-23 or 04-22 at your time zone?
That will help us to locate and fixed the issue. Thank you in advance.
- Copy Link
- Report Inappropriate Content
Is 1.0.14 currently the officially available version?
@Vincent can you possibly send me the latest version or publish it here? I have a customer who currently has a huge problem with the EAP783. Above all, response times are much too high and roaming works poorly.
I would then get him a new version.
- Copy Link
- Report Inappropriate Content
For me the 1.1.92 is much better than the "official Beta". My lags are gone at the moment
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
At the moment all is fine here :)
In my case, the devices slowed down considerably after a while. Sometimes reconnecting to the Wi-Fi helped, but often I had to restart the AP.
However, I currently only have one 783 in use in the living room. I have 660s installed in the basement and on the first floor.
The 783 has a significantly higher power consumption, so the two spare units are still in their boxes with my network equipment. The two EAP660s serve their purpose. I only benefit from the 6GHz network in the living room.
- Copy Link
- Report Inappropriate Content
Matt_cgn wrote
At the moment all is fine here :)
In my case, the devices slowed down considerably after a while. Sometimes reconnecting to the Wi-Fi helped, but often I had to restart the AP.
This could possibly help. The major customer has over 60x EAP783 in use and is currently reporting roaming problems and, above all, high response times.
A restart has not yet been carried out as it is being used productively.
Do you have the link for the .92 beta?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 10542
Replies: 126
Voters 2
