Hi @Hassan786 

Thanks for posting in our business forum.

The VLAN config is good.

PVID has been set. The uplink port 8 is trunked.

Check if you have properly configured your router for VLAN interfaces.

  @Clive_A 

Hi thanks for a help. Actually I am running OPnsnese on Proxmox VM with 2 Interfcaes ONE LAN and other OPT1 where VLANS are setup . 

All VLANS on opnsnese operational and setup .
 

Hi @Hassan786 

Thanks for posting in our business forum.

Hassan786 wrote

  @Clive_A 

Hi thanks for a help. Actually I am running OPnsnese on Proxmox VM with 2 Interfcaes ONE LAN and other OPT1 where VLANS are setup . 

All VLANS on opnsnese operational and setup .
 

Not sure if there are any special settings that should be set on the VM. I don't have much experience in VM. I mainly use prebuilt routers flushed with different systems. But the VLAN looks good to me on the switch.

Hi @Hassan786,

The VM is probably stripping the vlan tags.  I think there's a vlan aware setting for the VM's interfaces, but this might be a better question in a proxmox forum if you need those configuration details.

  @D-C Thanks for that ! actually found out that proxmox require openvswitch . After installing this I could assign and see IP assigned to VM's in proxmox however , even after installing this openvswitch I am still not getting any VLANS assigned thru switch. May be something worng with switch or not ?