802.1X mac based authentication does not work
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi!
I setup the buit-in radius server like described in this kb article. Thank you @Death_Metal for this great guide and video.
But I want to use it with mac based auth for my cameras. After setting up everthing the camera with mac EC-71-DB-53-B3-1B does not get an IP connection.
What I am doing wrong?
Thank you inadvance!
Br
Ronny
@Clive_A After reading the whole part about 802.1X again in the OC user guide I finally found the hint that solved my problem.
To enable MAB on a port you need to click twice, only if the rectancle around the hook is displayed MAB is activated on that port.
Very tricky dear tp link guys :-)
Okay I got it to work with user authentication. My failure was that I didn't uncheck the verify server by certificate. But if I want to authenticate against the computers mac address it is not working. I even don't see any log message in omada controller. I can only set it to computer authentication, than the PC tries to authenticate with domain/computer name. How the hack is this working?
@Clive_A After reading the whole part about 802.1X again in the OC user guide I finally found the hint that solved my problem.
To enable MAB on a port you need to click twice, only if the rectancle around the hook is displayed MAB is activated on that port.
Very tricky dear tp link guys :-)