Home Network Community > Deco > Deco X50 ethernet backhaul doesn't work.
< Deco

Deco X50 ethernet backhaul doesn't work.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco X50 ethernet backhaul doesn't work.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco X50 ethernet backhaul doesn't work.
Deco X50 ethernet backhaul doesn't work.
2025-02-15 13:28:26 - last edited 2025-02-18 01:39:31
Model: Deco X50  
Hardware Version:
Firmware Version: 1.2.8 Build 20240914 Rel 35513

Hello

I have a Deco BE85 and a Deco X50 Outdoor.

System:

Deco BE85 ----> TL-SG3428X switch ---> TL-SG108PE ---> Deco X50

However, the Ethernet backhaul does not work. There is only wifi connection between de deco BE85 and the Deco 50.

The deco X50 is powered by the TL-SG108PE (PoE).

All my network users have ip adress starting with 192.168.68. xxx

The X50 ---> 192.168.71.250

Is ther a solution to connect the  Deco BE85 and Deco X50 with Ethernet backhaul?

Thanks,

renaatdb

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Deco X50 ethernet backhaul doesn't work.-Solution
2025-02-15 15:01:29 - last edited 2025-02-18 01:39:31

  @renaatdb 

 

Try this: bring that X50 Outdoor to where Deco BE85, connect them with short Ethernet cable and use X50 Outdoor power supply to power it on.

 

This is what you will have:

 

Deco BE85 ---> Deco X50

 

If Ethernet backhaul works in this configuration, and X50 gets IP address from 192.168.68.* IP range, next step would be to test first switch, still using X50 Outdoor power supply:

 

Deco BE85 ----> TL-SG3428X switch ---> Deco X50

 

If Ethernet backhaul is still working and X50 Outdoor IP address still correct, now with short Ethernet cable and still using X50 Outdoor power supply connect it to one of non-POE ports of TL-SG108PE (ports 5 to 8), and see if Ethernet backhaul still works:

 

Deco BE85 ----> TL-SG3428X switch ---> TL-SG108PE ---> Deco X50

Recommended Solution
  1  
  1  
#2
Options
4 Reply
Re:Deco X50 ethernet backhaul doesn't work.-Solution
2025-02-15 15:01:29 - last edited 2025-02-18 01:39:31

  @renaatdb 

 

Try this: bring that X50 Outdoor to where Deco BE85, connect them with short Ethernet cable and use X50 Outdoor power supply to power it on.

 

This is what you will have:

 

Deco BE85 ---> Deco X50

 

If Ethernet backhaul works in this configuration, and X50 gets IP address from 192.168.68.* IP range, next step would be to test first switch, still using X50 Outdoor power supply:

 

Deco BE85 ----> TL-SG3428X switch ---> Deco X50

 

If Ethernet backhaul is still working and X50 Outdoor IP address still correct, now with short Ethernet cable and still using X50 Outdoor power supply connect it to one of non-POE ports of TL-SG108PE (ports 5 to 8), and see if Ethernet backhaul still works:

 

Deco BE85 ----> TL-SG3428X switch ---> TL-SG108PE ---> Deco X50

Recommended Solution
  1  
  1  
#2
Options
Re:Deco X50 ethernet backhaul doesn't work.
2025-02-17 11:57:37

  @Alexandre. 

Thanks, now it is working.

yes

  0  
  0  
#3
Options
Re:Deco X50 ethernet backhaul doesn't work.
2025-02-17 14:12:10

  @renaatdb 

 

If you don't mind telling, what was the problem? 

  0  
  0  
#4
Options
Re:Deco X50 ethernet backhaul doesn't work.
2025-02-17 14:48:04

  @Alexandre. 

I realy don't no.

I started the installation process again. Took your tips into account. Now it works. I havent't changed anything about the switch settings.

Thanks .

  1  
  1  
#5
Options

Information

Helpful: 0

Views: 666

Replies: 4

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.