ER7206 Failover WAN Dynamic DNS
ER7206 Failover WAN Dynamic DNS
Is there any way to set up Dynamic DNS so upon a failover to a backup WAN (not using load balancing), the Dynamic DNS will use the failover WAN's IP address to update the dynamic IP? It appears only possible to have dynamic dns map to a specific physical WAN port, and would require a manual updating of settings to utilize the new WAN's IP to drive a dynamic dns update.
Any workarounds?
1 Accepted Solution
Re:ER7206 Failover WAN Dynamic DNS-Solution
Hi @sc23
Thanks for posting in our business forum.
Not supported.
When you select the DDNS, it binds to the WAN interface.
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.
● I don't provide ETA for any products/features. No comment.
Re:ER7206 Failover WAN Dynamic DNS-Solution
Hi @sc23
Thanks for posting in our business forum.
Not supported.
When you select the DDNS, it binds to the WAN interface.
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.
● I don't provide ETA for any products/features. No comment.