This Article Applies To:

 

EAP725-Wall_V1

 

 

Release Notes:

New Feature/ Enhancement:

1. Supports displaying Configuration Result.
2. Supports cluster deployment in Controller mode (CBC does not support).
3. Supports Radius Proxy.
4. Supports OWE.
5. Supports custom Channel Range.
6. Supports upgrading firmware through cloud in Standalone mode.
7. Supports Portal Logout.
8. Supports disabling HTTP protocol in Standalone mode.
9. Supports DHCP Option43.
10. Supports multiple Radius Servers for MAC-Based Authentication.
11. Supports configuring NAS ID with WPA-Enterprise encryption.
12. Supports DNS Queries.
13. Supports configuring Rate Limit with Portal in Controller mode.
14. Supports configuring the Device Name in Controller mode, which can be carried in LLDP/SNMP/DHCP interaction.
15. Supports viewing status information and making some simple configuration through Standalone management page when the EAP is managed by the Controller and disconnected with Controller currently.
16. Supports displaying the maximum associated clients based on the EAP model in Controller mode.
17. Supports displaying the radio bandwidth of the EAP in Controller mode.
18. Supports configuring wireless mode in Controller mode.
19. Supports statistics of Multicast/Broadcast packets.
20. Supports 1024 PPSK entries.
21. Supports 802.11 a/n mixed in 5G.
22. Supports Non-stick Roaming function.
23. Supports authentication type of EKMS and Generic Radius with Unbound MAC for PPSK with Radius.
24. Supports Multicast Filtering with IPv6 address.
25. Supports reporting default OFDMA status.
26. Supports MAC Filter with 2000 entries per MAC Group profile.
27. Supports DNS adoption.
28. Supports Multicast/Broadcast Rate Limit.
29. Supports Radius logout and CHAP encryption in Standalone mode.
30. Supports Portal landing page selection in Standalone mode.
31. Supports wired client traffic reporting of accelerated models.
32. Supports modifying the Inform URL in SSH.
33. Supports New VI: Including New Logo, New Color Specifications and New Typography in Standalone Website.
34. Enhances security protection.
35. Improves stability.
36. Improves support for more SSH commands.
37. Optimizes Automatic Power Optimization function.
38. Optimizes the configuration of Beacon Interval.
39. Optimizes logs displayed in Controller.
40. Modifies the default list of NTP Servers.
41. Optimizes the AP Portal function.
42. Optimizes the management VLAN : only untagged and vlan1 address management packets can pass through when set to default.
43. Optimizes the configuration logic and improved the configuration efficiency.
44. Upgrades the OpenSSL library version to 1.1.1n.
45. Adds the EAP power information to LLDP messages.
46. Updates the Uboot function.

 

Bug Fixed:

1. Resolves the issue that RSSI information display error in WLAN Optimization.
2. Resolves the issue about LLDP-MED packet forwarding exception.
3. Resolves the issue that URL Filtering cannot work properly when TLS1.3 is enabled in the browser.
4. Resolves the issue that HTTPS Redirection and Pre-Authentication Access don’t take effect in some special scenarios.
5. Resolves the issue of high air interface occupancy rate in large-scale deployment scenarios.
6. Resolves the issue that modifying the PPSK without radius profile affected other SSIDs.

 

Beta Firmware Download

 

Attention

 

Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

 

EAP725-Wall_V1_1.1.0_20250520 (Pre-release)

 

 

Notes:

(1) The above firmware is applied to EAP725-Wall V1.

(2) Your device’s configuration won’t be lost after upgrading.

 

 

 

Update Log

 

23th May, 2025

 

Provide the pre-release link:

 

EAP725-Wall_V1_1.1.0_20250520 (Pre-release)

 

 

Feedback

 

Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.

To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.

 

When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:

• Management mode (Controller or Standalone)
• Device Model(s) and Hardware
• Device Firmware (previous and current)

 

Thank you in advance for your great cooperation and support.

 

Recommended Threads

 

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada EAP Related Issues [Constantly Updated]

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates