Er695

Er695

Er695
Er695
2025-05-25 07:16:18 - last edited 2025-05-26 01:26:16
Model: ER605 (TL-R605)  
Hardware Version:
Firmware Version: 2.0

Morning 

 

Can I use the 605 to connect straight to a Hyperoptic ONP ?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Er695-Solution
2025-05-26 01:26:12 - last edited 2025-05-26 01:26:16

  @Steviep 

A router would usually connect to most modems.

If you are not sure, you can buy and test it. If you need support on the modem config, contact your vendor. The router would usually plug in and work straight with the proper connection type(if you are not sure about this, ask your ISP).

Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Er695-Solution
2025-05-26 01:26:12 - last edited 2025-05-26 01:26:16

  @Steviep 

A router would usually connect to most modems.

If you are not sure, you can buy and test it. If you need support on the modem config, contact your vendor. The router would usually plug in and work straight with the proper connection type(if you are not sure about this, ask your ISP).

Recommended Solution
  1  
  1  
#2
Options