Early Access EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
This Article Applies To:
EAP610-outdoor V1 Fully Adapted to Omada SDN Controller v6.1 or above;
EAP620 HD V3 Fully Adapted to Omada SDN Controller v6.1 or above;
EAP660 HD V2 Fully Adapted to Omada SDN Controller v6.1 or above;
EAP623-outdoor HD V1 Fully Adapted to Omada SDN Controller v6.1 or above;
EAP625-outdoor HD V1 Fully Adapted to Omada SDN Controller v6.1 or above;
EAP655-Wall V1, Fully Adapted to Omada SDN Controller v6.1 or above;
Note
To update to this pre-release version, please make sure your device version is not lower than the version listed below:
EAP610_outdoor 1.0： 1.3.1 Build 20240828 Rel. 83596
EAP620HD 3.0：1.3.1 Build 20240828 Rel. 82224
EAP623_outdoor HD 1.0：1.3.1 Build 20240929 Rel. 44649
EAP625_outdoor HD 1.0：1.3.1 Build 20240929 Rel. 44649
EAP660HD 2.0：1.2.0 Build 20240828 Rel. 85483
No limit for EAP655-Wall v1
Release Notes:
New Feature/ Enhancement:
1. Supported Omada APs of new VI.
2. Adapted to CE-RED certification.
3. Optimized configuration synchronization mechanism.
4. Optimized automatic adoption.
5. Optimized ACS mechanism.
6. Optimized DFS switching mechanism and radar wave conflict handling.
7. Optimized automatic bandwidth selection mechanism.
8. Optimized background scanning mechanism.
9. Optimized VLAN implementation mechanism.
10. Optimized Log reporting mechanism, adding logs related to DFS, CPU utilization, and more.
11. Optimized PPSK configuration process. Configuring a PPSK profile will only affect the modified entries.
12. Optimized FDB table management mechanism. Wireless connection information will be cleared when the FDB table changes.
13. Optimized CoA-ACK/NAK message cache mechanism.
14. Supported secure firmware download strategy.
15. Supported configuration of WPA3 Enterprise on the Standalone page.
16. Supported configuration of DNS adoption switch (Remote Adoption) on the Standalone page.
17. Supported EAP CLI command system.
18. Modified the default security policy of SSIDs in factory state.
19. Modified the verification rules for static IP configuration items on the Standalone page.
20. Solved the problem of redirection and adoption failure of devices in management state in NAT scenario.
21. Solved the Blast-RADIUS security vulnerability and added a message-authenticator attribute verification switch.
Beta Firmware Download
Attention
Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
EAP610_outdoor v1.0 _1.6.0 (Pre-release Version)
EAP620HD v3.0_1.6.0 (Pre-release Version)
EAP623_outdoor HD v1.0_1.6.0 (Pre-release Version)
EAP625_outdoor HD v1.0_1.6.0 (Pre-release Version)
EAP660HD v2.0_1.6.0 (Pre-release Version)
EAP655-Wall v1.0_1.6.0 (Pre-release Version)
Notes:
(1) Your device’s configuration won’t be lost after upgrading.
(2) The above firmware is fully adapted to Omada SDN Controller v6.1 and above
Update Log
5th Jun, 2025
Provide the pre-release link:
EAP610_outdoor v1.0 _1.6.0 (Pre-release Version)
EAP620HD v3.0_1.6.0 (Pre-release Version)
EAP623_outdoor HD v1.0_1.6.0 (Pre-release Version)
EAP625_outdoor HD v1.0_1.6.0 (Pre-release Version)
EAP660HD v2.0_1.6.0 (Pre-release Version)
EAP655-Wall v1.0_1.6.0 (Pre-release Version)
Feedback
Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:
- Management mode (Controller or Standalone)
- Device Model(s) and Hardware
- Device Firmware (previous and current)
Thank you in advance for your great cooperation and support.
Recommended Threads
EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada EAP Related Issues [Constantly Updated]
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
So the EAP660HD V1 won't be getting Omada Controller V6 support?
Is it already EOL ?
I'm still waiting for my DFS channels that were supposed to be delivered with a firmware update...
Do I need to already switch to Unifi ?
Regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
EAP610-Outdoor has problems with memory, the problem comes when I run speedtest, the memory goes up to over 90% and it doesn't go down until the AP is restarted. I have tested on two different APs, both go up to over 90% after a test with the speedtest app on the phone. It seems like it's only speedtest that has the problem, I have downgraded to 1.4.3 which does not have the same problem.
The AP has few clients, at most 9-10 IoT devices connected, so not much traffic.
- Copy Link
- Report Inappropriate Content
Hi @MR.S
Thanks for the feedback.
We had made a beta firmware to fix it. And I had sent it to you via email. The ID is TKID250747986.
Please have a check.
- Copy Link
- Report Inappropriate Content
yes I got it, Thank you very much, this version was better but the memory went from 66% to 85% and then went down to 80% when I ran speedtest. I'll do some more testing.
One client and one SSID configured ..
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Yes
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3774
Replies: 35
Voters 0
No one has voted for it yet.