QoS bandwidth control not working as expected.
Just recently installed an ER605 for my home network. Noticed I was having an issue where whenever I'd upload something my ping would slowly increase from 20ms to 300ms. When I changed bandwidth to just under what I would get from my isp it would fix my ping issue but my upload speed wouldn't be able to go over 1Mbps (even when bandwidth is set to double what ISP provides). Any thoughts on how I can fix the issue of my speeds dropping to nothing when I change my bandwidth settings to anything under what my ISP provides?
Also the issue persists even when I set it to double or triple
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
What is the value your ISP allows for your upload?
QoS is like so, you need to limit the bandwidth. And limiting it would make the ping stable. There isn't much you can do with it.
Bandwidth-related features are supposed to be set properly according to your actual Internet plan. Not randomly setting a value and expecting it to fix your network fluctuation.
- Copy Link
- Report Inappropriate Content
What is the value your ISP allows for your upload?
QoS is like so, you need to limit the bandwidth. And limiting it would make the ping stable. There isn't much you can do with it.
Bandwidth-related features are supposed to be set properly according to your actual Internet plan. Not randomly setting a value and expecting it to fix your network fluctuation.
- Copy Link
- Report Inappropriate Content
@Clive_A I'm currently getting 25x5. (Will be upgrading to 300x300 soon). I set my bandwidth setting to 24500 and 4500 (so around o
90%)
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
25x5 Mbps. 24500 Kbps and 4500 Kbps
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I've been changing the bandwidth control settings under the QoS menu. Then there's the separate Bandwidth control menu. And this is going on when I change QoS. So do I also need to set separate rules under Bandwidth control? Instead of the Bandwidth control that's under Qos?
Transmission -> QoS -> Bandwidth control (what I've been changing)
Transmission -> Bandwidth control (the other menu)
- Copy Link
- Report Inappropriate Content
TTSI wrote
I've been changing the bandwidth control settings under the QoS menu. Then there's the separate Bandwidth control menu. And this is going on when I change QoS. So do I also need to set separate rules under Bandwidth control? Instead of the Bandwidth control that's under Qos?
Transmission -> QoS -> Bandwidth control (what I've been changing)
Transmission -> Bandwidth control (the other menu)
Not sure what mode. Not just the Bandwidth Control. The QoS contains two parts. Bandwidth Control and the QoS(priority settings). As said, when you are below 50Mbps or 100Mbps, QoS is important. Above that value, you can simply use the BC.
You can refer to this:
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 379
Replies: 7
Voters 0
No one has voted for it yet.