Business Community > Wireless > EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)
< Wireless

Early Access EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)

12

Early Access EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)

17 Reply
Re:EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)
2025-07-10 07:38:20

Hi  @medievalknievel 

 

Thanks for the feedback. Please help us confirm the following info:

 

  1. What does the stop function mean? Will you see the EAP SSID when the issue happened?
  2. When the issue occurred, what was the LED status of the EAP670? Is it off?
  3. Do you use an Omada controller? Or would you please let me know whether you manage the EAP using its standalone interface?
  4. What's the model number of the POE switch? If possible, please change a different ethernet cable to power on the EAP.
  5. When did you first notice this problem? Since the first installation? Do you know if it worked well before?
  6. How often will the issue happen?
  7. How many clients are connecting to the EAP?
  8. How many clients are plugging into the POE switch?

medievalknievel wrote

Hello, I was led to this thread after experiencing issues with my EAP 670 V2. The behavior is that my EAP670 randomly seems to stop functioning after X # of days and requires the PoE to be removed/reinserted for it to function correctly again. During this time the wired network has no issues, it's isolated to the AP. Furthermore I cannot access the web dashboard of the AP during this time. I do not know if I can access the AP via SSH as it's disabled but I plan to enable it and attempt accessing to understand how "down" the AP is during this time. As of today (7/9/25) I am on firmware 1.3.0 Build 20250609 Rel. 35129(5553) Any suggestions would be appreciated

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#12
Options
Re:EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)
2025-07-16 21:48:19

  @Vincent-TP 

 

4 weeks on and happy to report that no strange issues have been noted or reported to me on any of my 8 650 v1 units running this beta

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x3, ES208G x1, EAP650 x6 Remote: ER7206 v2 x1, ER605 v2 x3, SG2008P x2, EAP650 x2, ES205G x1 Controller: OC300
  1  
  1  
#13
Options
Re:EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)
2025-07-17 01:36:36

Hi  @GRL 

 

Thanks for the feedback. enlightened

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#14
Options
Re:EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)
2025-07-24 17:42:15

  @Vincent-TP 

 

Vincent-TP wrote

Hi  @medievalknievel 

 

Thanks for the feedback. Please help us confirm the following info:

 

  1. What does the stop function mean? Will you see the EAP SSID when the issue happened?
  2. When the issue occurred, what was the LED status of the EAP670? Is it off?
  3. Do you use an Omada controller? Or would you please let me know whether you manage the EAP using its standalone interface?
  4. What's the model number of the POE switch? If possible, please change a different ethernet cable to power on the EAP.
  5. When did you first notice this problem? Since the first installation? Do you know if it worked well before?
  6. How often will the issue happen?
  7. How many clients are connecting to the EAP?
  8. How many clients are plugging into the POE switch?

medievalknievel wrote

Hello, I was led to this thread after experiencing issues with my EAP 670 V2. The behavior is that my EAP670 randomly seems to stop functioning after X # of days and requires the PoE to be removed/reinserted for it to function correctly again. During this time the wired network has no issues, it's isolated to the AP. Furthermore I cannot access the web dashboard of the AP during this time. I do not know if I can access the AP via SSH as it's disabled but I plan to enable it and attempt accessing to understand how "down" the AP is during this time. As of today (7/9/25) I am on firmware 1.3.0 Build 20250609 Rel. 35129(5553) Any suggestions would be appreciated

 


So sorry, didnt realize I had received a reply! 

I'll need to double check status of SSID but anything connected to that network prior to the behavior looses internet access, IoT devices, laptops, etc
The LED status light is on, solid blue

Use the standalone interface, its the only AP on the network
POE is TP-Link TL-260S - i will try preparing a new ethernet cable
This behavior started some time (scale of days to week or two) after the unit was installed, I've only had the unit a few weeks

At this point the behavior has occured 3 or 4 times over the last 2-ish months

Client list is at about 30 devices

Switch is single port, so just the AP

  0  
  0  
#16
Options
Re:EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)
2025-07-25 03:35:50

Hi  @medievalknievel 

 

Thanks for the reply.

 

This behavior started some time (scale of days to week or two) after the unit was installed, I've only had the unit a few weeks

>>> Does this mean this happened both on the factory firmware and this pre-release version?

 

Please try to change the Ethernet cable and observe the performance for more time. Thanks.

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#17
Options
Re:EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)
2025-07-26 00:12:12

  @Vincent-TP 

 

Hello!

 

Does this mean this happened both on the factory firmware and this pre-release version? - yes, that is correct. 

 

I will test that new wire and report back. Are there any logs or data I could gather from the AP that would help to understand root cause?

  0  
  0  
#18
Options
Re:EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)
2025-07-28 06:00:05

Hi  @medievalknievel 

 

Under standalone mode, you may check the logs from this page:

medievalknievel wrote

  @Vincent-TP 

 

Hello!

 

Does this mean this happened both on the factory firmware and this pre-release version? - yes, that is correct. 

 

I will test that new wire and report back. Are there any logs or data I could gather from the AP that would help to understand root cause?

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#19
Options
12
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.