Home

Forums

Stories

Knowledge Base

Business Community > Switches > Resetting my TP- Link JetStream TL-SG3428MP switch with console port and unable to get back in WEB

< Switches

Resetting my TP- Link JetStream TL-SG3428MP switch with console port and unable to get back in WEB

NightRaven-

2025-06-19 10:50:46 - last edited 2025-06-20 01:46:25

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2025-06-18

Resetting my TP- Link JetStream TL-SG3428MP switch with console port and unable to get back in WEB

2025-06-19 10:50:46 - last edited 2025-06-20 01:46:25

Tags: #Configuration

Model: TL-SG3428MP

Hardware Version: V2

Firmware Version: Unknown

Resetting my TP- Link JetStream TL-SG3428MP switch with console port and unable to get back in WEB interface by logging into the IP
Also I am not getting any status on any of the ports and the SYS light is blinking

Is there someone who can assist me with the reset to ensure it is done correctly

Kind regards

1 Accepted Solution

Clive_A

2025-06-20 01:46:22 - last edited 2025-06-20 01:46:25

Posts: 8362

Helpful: 4306

Solutions: 2193

Stories: 0

Registered: 2023-06-09

Re:Resetting my TP- Link JetStream TL-SG3428MP switch with console port and unable to get back in WEB-Solution

2025-06-20 01:46:22 - last edited 2025-06-20 01:46:25

@NightRaven-

The system will boot up with the default 192.168.0.1 IP, while without a DHCP server, and will get an IP from the DHCP server if there is one.

You need to set up an IP from the same subnet and access 192.168.0.1.

Or you are supposed to find the IP from the DHCP server and use that IP to log in your switch.

Recommended Solution

1 Reply

Clive_A

2025-06-20 01:46:22 - last edited 2025-06-20 01:46:25

Posts: 8362

Helpful: 4306

Solutions: 2193

Stories: 0

Registered: 2023-06-09

Re:Resetting my TP- Link JetStream TL-SG3428MP switch with console port and unable to get back in WEB-Solution

2025-06-20 01:46:22 - last edited 2025-06-20 01:46:25

@NightRaven-

The system will boot up with the default 192.168.0.1 IP, while without a DHCP server, and will get an IP from the DHCP server if there is one.

You need to set up an IP from the same subnet and access 192.168.0.1.

Or you are supposed to find the IP from the DHCP server and use that IP to log in your switch.

Resetting my TP- Link JetStream TL-SG3428MP switch with console port and unable to get back in WEB

Resetting my TP- Link JetStream TL-SG3428MP switch with console port and unable to get back in WEB

Information

Voters 0

Tags