NVR1104H-4P shows only 2 cameras of 4 connected
Hello, I have problem with very first screen directly from NVR. It shows picture only from 2 cameras from 4 connected. All cameras are the same (c240).
Important to mention - in Android App and PC Security Manager I see all 4 cameras...
In the NVR settings, all cameras are identified, updated. But I cant get them (those 2 of 4) into main first screen, no matter how hard I try :-(
When I click "+" button on the corner of blank square, there are no cameras to choose - I aasume because they are all already set on NVR...
Thank you for your advice in advance, Daniel
@Schyzoy Hello Clive, thank you for your reply.
To bring you more details: all my 4 cameras are connected, functioning. I can see and manage them on Android App + on Windows Security Manager.
Where I can NOT see all 4 cameras (only 2) is the main screen directly from NVR (monitor connected to NVR). I have 4-cameras view there, but only 2 "squares" display video from cameras, other 2 are blanks.
In the SETTINGS (directly on NVR) I see (and can configure parameters) of all 4 cameras (1st picture below).
In the DISPLAY tab of te NVR menu (submenu IMAGE) I also see all 4 cameras (2nd picture below).
My problem is that I can not (or I dont know how to) display ALL 4 CAMERAS on the very first screen of my NVR, where only 2 of 4 cameras have picture. i posted this screen in my earlier post.
Hope somebody can help me to solve it :-(
Thank you!
As I mentioned, you need to add the camera to the camera view. I assumed that you had added them.
But they are not displayed on the 1-channel, 2-channel, 4-channel, 8 or 16 channel view because you don't add them.
You need to switch the channel.
Settings > System > Screen layout.
