Early Access EAP683 | EAP653 | EAP650 Pre-release Adapted to Omada Controller v6.1 (Released on 21th Jul, 2025)
This Article Applies To:
EAP650 V2 Fully Adapted to Omada SDN Controller v6.1 or above;
EAP650-Wall V2.20 Fully Adapted to Omada SDN Controller v6.1 or above;
EAP683 LR V1 Fully Adapted to Omada SDN Controller v6.1 or above;
EAP683UR V1 Fully Adapted to Omada SDN Controller v6.1 or above;
EAP653 UR V1 Fully Adapted to Omada SDN Controller v6.1 or above;
EAP603-Outdoor V1 Fully Adapted to Omada SDN Controller v6.1 or above;
Release Notes:
New Feature/ Enhancement:
1. Supported Omada APs of new VI.
2. Adapted to CE-RED certification.
3. Optimized configuration synchronization mechanism.
4. Optimized automatic adoption.
5. Optimized ACS mechanism.
6. Optimized DFS switching mechanism and radar wave conflict handling.
7. Optimized automatic bandwidth selection mechanism.
8. Optimized background scanning mechanism.
9. Optimized VLAN implementation mechanism.
10. Optimized Log reporting mechanism, adding logs related to DFS, CPU utilization, and more.
11. Optimized PPSK configuration process. Configuring a PPSK profile will only affect the modified entries.
12. Optimized FDB table management mechanism. Wireless connection information will be cleared when the FDB table changes.
13. Optimized CoA-ACK/NAK message cache mechanism.
14. Supported secure firmware download strategy.
15. Supported configuration of WPA3 Enterprise on the Standalone page.
16. Supported configuration of DNS adoption switch (Remote Adoption) on the Standalone page.
17. Supported EAP CLI command system.
18. Modified the default security policy of SSIDs in factory state.
19. Modified the verification rules for static IP configuration items on the Standalone page.
20. Solved the problem of redirection and adoption failure of devices in management state in NAT scenario.
21. Solved the Blast-RADIUS security vulnerability and added a message-authenticator attribute verification switch.
Beta Firmware Download
Attention
Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
EAP650 V2_1.5.50 (Pre-release Version)
EAP650-Wall V2.20_1.5.50 (Pre-release Version)
EAP683 LR V1_1.4.50 (Pre-release Version)
EAP683UR V1_1.4.50 (Pre-release Version)
EAP653 UR V1_1.5.50 (Pre-release Version)
EAP603-Outdoor V1_1.5.50 (Pre-release Version)
Notes:
(1) Your device’s configuration won’t be lost after upgrading.
(2) The above firmware is fully adapted to Omada SDN Controller v6.1 and above
Update Log
21th Jul, 2025
Provide the pre-release link:
EAP650 V2_1.5.50 (Pre-release Version)
EAP650-Wall V2.20_1.5.50 (Pre-release Version)
EAP683 LR V1_1.4.50 (Pre-release Version)
EAP683UR V1_1.4.50 (Pre-release Version)
EAP653 UR V1_1.5.50 (Pre-release Version)
EAP603-Outdoor V1_1.5.50 (Pre-release Version)
Feedback
Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:
- Management mode (Controller or Standalone)
- Device Model(s) and Hardware
- Device Firmware (previous and current)
Thank you in advance for your great cooperation and support.
Recommended Threads
EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)
EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada EAP Related Issues [Constantly Updated]
Hi @Vincent-TP
hardware:
ER605 V2
SG2008P
EAP683UR
software controller running on Linux Ubuntu 24/7.
ISP Fiber connection speeds of 950mbps down and 660 upload.
3 current VLANs
3 matching WLANs each band separated out
little to no neighbor interference on most channels
house is a ranch style with finished basement around 1780sq ft.
AP placement is in the middle of the house ceiling mounted on main floor away from obstructions.
I recently purchased the EAP683 UR and have had quite a rough time with performance on it. When I first adopted it I was receiving speeds around 200mbps down and 300mbps upload standing less than 5 foot from it. When I setup my VLANs the speeds got even worse. All hardware was updated to the latest firmware during this trial period. I have also noticed significant errors, drops, and retries. Please see the attached pictures.
troubleshooting I tried:
/reducing TX power on both 2.4 and 5ghz - no affect
/seperating each band- no affect
/changing channels and width- little to no affect, even performance loss on certain bands
/ rebooting systems- no affect
the only thing has seemed to make any difference was updating to the most current beta release (which meant updating to the most recent beta release software controller). Although even still the pictures are after all that and I am still having high errors and degraded performance especially if I move more than 10 feet away from the AP.
please let me know if I should submit this elsewhere.
Hi @QuinnsJoker
Thanks for the feedback.
Do you enable Prohibit Wi-Fi sharing for the tested SSID? If yes, please uncheck it and see if the situation persists.
