No Client Icons After Reboot

No Client Icons After Reboot

No Client Icons After Reboot
No Client Icons After Reboot
2 weeks ago - last edited 2 weeks ago
Model: OC300  
Hardware Version: V1
Firmware Version: 1.30.7 Build 20250704 Rel.78617

Today I performed a reboot of the controller and most of the client icons are gone.  Only 6 of 30 clients still show the custom icon.  Fortunately, I don't have that many clients to reconfigure.  Is this a known problem?

 

1x ER706W 1x OC300 4x SG2008 1x EAP610 2x EAP650
  0      
  0      
#1
Options
5 Reply
Re:No Client Icons After Reboot
2 weeks ago

  @jra11500 I have been facing the similar issue since this feature was introduced.

  0  
  0  
#2
Options
Re:No Client Icons After Reboot
2 weeks ago

  @jra11500 

 

 

HI , I AM ALSO FACING SAME ISSUE 

 

 

Omada & VIGI | Using at 3 Locations | Controller: V6.0.0.19 (Linux) | GW: ER7206 | SW: SG2428P & SG2210P | APs: 2 × EAP610 | WAN: Jio&Airtel | NVR2016H & 8 Cam's.
  0  
  0  
#3
Options
Re:No Client Icons After Reboot
2 weeks ago

 

 

Is there any way to change the ICON, I can't find it on my controller. Can anyone give me a hint on where to configure it?

 

  0  
  0  
#4
Options
Re:No Client Icons After Reboot
2 weeks ago

I found it :-)

  0  
  0  
#5
Options
Re:No Client Icons After Reboot
2 weeks ago

  @jra11500 

 

for reference

 

Omada & VIGI | Using at 3 Locations | Controller: V6.0.0.19 (Linux) | GW: ER7206 | SW: SG2428P & SG2210P | APs: 2 × EAP610 | WAN: Jio&Airtel | NVR2016H & 8 Cam's.
  0  
  0  
#6
Options