Early Access EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Closed on 23st Oct, 2025)
This Article Applies To:
EAP670v1 1.3.50 Fully Adapted to Omada SDN Controller v6.0.
EAP650v1 1.3.50 Fully Adapted to Omada SDN Controller v6.0.
EAP670v2 1.3.50 Fully Adapted to Omada SDN Controller v6.0.
EAP673-Extenderv1 1.3.50 Fully Adapted to Omada SDN Controller v6.0.
EAP650-0utdoorv1 13.50 Fully Adapted to Omada SDN Controller v6.0.
EAP673v1 1.3.50 Fully Adapted to Omada SDN Controller v6.0.
EAP650D30-0utdoorv1 1.3.50 Fully Adapted to Omada SDN Controller v6.0.
EAP650D120-0utdoorv1 13.50 Fully Adapted to Omada SDN Controller v6.0.
EAP653v1 1.3.50 Fully Adapted to Omada SDN Controller v6.0.
Release Notes:
1. Supported Omada APs of new VI.
2. Adapted to CE-RED certification.
3. Optimized DFS switching mechanism and radar wave conflict handling.
4. Optimized automatic bandwidth selection mechanism.
5. Optimized CoA-ACK/NAK message cache mechanism.
6. Supported EAP CLI command system.
7. Supported terminal device identification
8. Solved the Blast-RADIUS security vulnerability and added a message-authenticator attribute verification switch
9. Supported configuration of WPA3 Enterprise on the Standalone page.
10. Supported configuration of DNS adoption switch (Remote Adoption) on the Standalone page.
11. Modified the verification rules for static IP configuration items on the Standalone page
12. Optimized memory fluctuations under high load
13. Supported EO-GRE function
Beta Firmware Download
Attention
Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
EAP670v1 1.3.50_20250819 (Pre-release version)
EAP650v1 1.3.50)_20250819 (Pre-release version)
EAP670v2 1.3.50_20250819 (Pre-release version)
EAP673-Extenderv1 1.3.50_20250819 (Pre-release version)
EAP650-Outdoorv1 13.50_20250819 (Pre-release version)
EAP673v1 1.3.50_20250819 (Pre-release version)
EAP650D30-0utdoorv1 1.3.50_20250819 (Pre-release version)
EAP650D120-0utdoorv1 13.50_20250819 (Pre-release version)
EAP653v1 1.3.50_20250819 (Pre-release version)
Update Log
23th Oct, 2025
Remove all beta links.
26th Sep, 2025
Remove the beta link for EAP650-outdoor and EAP653 V1.
For the latest firmware, please go to the official website.
21st Aug, 2025
Provide the pre-release link:
EAP670v1 1.3.50_20250819 (Pre-release version)
EAP650v1 1.3.50)_20250819 (Pre-release version)
EAP670v2 1.3.50_20250819 (Pre-release version)
EAP673-Extenderv1 1.3.50_20250819 (Pre-release version)
EAP650-0utdoorv1 13.50_20250819 (Pre-release version)
EAP673v1 1.3.50_20250819 (Pre-release version)
EAP650D30-0utdoorv1 1.3.50_20250819 (Pre-release version)
EAP650D120-0utdoorv1 13.50_20250819 (Pre-release version)
EAP653v1 1.3.50_20250819 (Pre-release version)
Feedback
Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:
- Management mode (Controller or Standalone)
- Device Model(s) and Hardware
- Device Firmware (previous and current)
Thank you in advance for your great cooperation and support.
Recommended Threads
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada EAP Related Issues [Constantly Updated]
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I would also like to know if there are any details about why this beta closed without releasing stable versions for the 670 v2? As far as I can tell the 1.3.0 beta firmware for these is still up, so that makes at least 2 public beta versions since the last stable 1.1.1. I run it in standalone, so I am not terribly worried about controller compatibility, but the improvements to DFS (which I assume to be an implementation of, or similar to zero-wait DFS) seem very helpful!
- Copy Link
- Report Inappropriate Content
I think I see whats happening. As of 1/14, the regulatory compliance documents for the v3 versions of most of these access points were posted publicly on the US support pages.
That means these are getting new revisions, not sure what the new changes would be as v2's were pretty much just smaller. But, it probably means that this beta is not going to have a stable release until the initial firmware of the v3 units.
- Copy Link
- Report Inappropriate Content
Dear Sir/Madam,
I am noticing that with firmware EAP670v1 1.3.50, I cannot fully access the internet link.
I have 500MB and every time I run a speed test on different devices, I get between 230MB and 250MB. The upload speed has the same problem.
I have full access to the network.
- Copy Link
- Report Inappropriate Content
Are you using SSID rate limits or Prohibit wifi sharing? that is a known bug with both features limiting throughput to around 220 to 250mbit
- Copy Link
- Report Inappropriate Content
@GRL hi will be be possible for you to share the firmware EAP 650 V1 1.3.5 ? As I have quite a few. Thanks
- Copy Link
- Report Inappropriate Content
Bingo!
I only use it on one Wi-Fi network, and the setting is for 70MB download and 50MB upload.
Before your reply, I was suspicious about this and I disabled it, but the problem persisted. I only disabled the rate limit for this Wi-Fi network.
When you say it's an old problem, how long has it been going on?
- Copy Link
- Report Inappropriate Content
ah, thats actually a different problem then. Rate limits set higher than around 220mbit dont work, the EAP wont go any higher than 220ish when rate limit is enabled on a SSID
Prohibit wifi sharing does also limit it to about 220ish
Other than that, i have not encountered your specific issue - i can easily get 930 (maxing out the uplink) both directions from my EAP650 units with well tuned radio settings
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 6977
Replies: 37
Voters 0
No one has voted for it yet.