Business Community > Wireless > Client AP not connecting
< Wireless

Client AP not connecting

Client AP not connecting

Client AP not connecting
Client AP not connecting
Friday - last edited Yesterday
Tags: #Network Connectivity
Model: EAP215-Bridge KIT  
Hardware Version:
Firmware Version:

Replacing an old unit that stopped working.

New from box bridge kit - Main Ap lights up as it should. Client lights (signal strength & system only) come on but no LAN signal. Then signal strength lights (all 3) go out.

Units are 10m apart with direct line of sight. Main AP shows up in wifi search but not the client. 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Client AP not connecting-Solution
Yesterday - last edited Yesterday

Hi  @AndyGH 

 

Thanks for posting here.

 

What old units are you referring to? Are they also EAP215-bridge kit?

 

Based on the status lights you described, it appears this pair of Bridge KIT has not successfully established a connection, and there are no devices connected to the client LAN port. Is this accurate?

 

If so, we recommend reconfiguring your EAP by following the instructions below:

How to establish a point-to-point connection with EAP-Bridge

 

Also, if you have any installation questions, you can contact our hotline team for step-by-step and real-time assistance.

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Client AP not connecting-Solution
Yesterday - last edited Yesterday

Hi  @AndyGH 

 

Thanks for posting here.

 

What old units are you referring to? Are they also EAP215-bridge kit?

 

Based on the status lights you described, it appears this pair of Bridge KIT has not successfully established a connection, and there are no devices connected to the client LAN port. Is this accurate?

 

If so, we recommend reconfiguring your EAP by following the instructions below:

How to establish a point-to-point connection with EAP-Bridge

 

Also, if you have any installation questions, you can contact our hotline team for step-by-step and real-time assistance.

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 57

Replies: 1

Tags

Network Connectivity
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.