Repeated loss of configuration settings

Repeated loss of configuration settings

Repeated loss of configuration settings
Repeated loss of configuration settings
2025-09-01 11:09:17 - last edited 2025-09-05 08:13:29
Model: EAP110-Outdoor  
Hardware Version: V3
Firmware Version: 5.0.9

Have two of these.

bought a new one because the old one kept losing its settings after maybe an hour.

new one now doing the same.

configured as an outdoor wifi connected to the LAN and sharing the same wifi signal not as a range extension.

configured and working, picks up my cctv cameras and all is well then after maybe a couple of hours it drops back to an unconfigured factory set unit and no longer presents the correct wifi SSID signal.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Repeated loss of configuration settings-Solution
2025-09-02 06:00:43 - last edited 2025-09-05 08:13:29

  @GeoffExmouth 

 

Thanks for posting here.

 

This is most likely caused by an improper power supply. Please check:

1. do you use the included POE adapter to power on the unit?

2. Please test with shorter Ethernet cables.

 

 

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Repeated loss of configuration settings-Solution
2025-09-02 06:00:43 - last edited 2025-09-05 08:13:29

  @GeoffExmouth 

 

Thanks for posting here.

 

This is most likely caused by an improper power supply. Please check:

1. do you use the included POE adapter to power on the unit?

2. Please test with shorter Ethernet cables.

 

 

Recommended Solution
  0  
  0  
#2
Options