OC 300 controller SSID mac Filtering not working

2 weeks ago - last edited Friday

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2025-09-03

OC 300 controller SSID mac Filtering not working

2 weeks ago - last edited Friday

Model: OC300

Hardware Version: V1

Firmware Version: 1.30.7 build 20250704 Rel.78617

It sounds like you're using the OC300 Controller and facing a strange behavior with MAC filtering on your SSID:

When you add a MAC address to the Allow list, the device does not connect.
But when you add the same MAC address to the Deny list, the device connects successfully.

2 Reply

a week ago - last edited Friday

Posts: 3624

Helpful: 354

Solutions: 1224

Stories: 0

Registered: 2024-06-22

Re:OC 300 controller SSID mac Filtering not working

a week ago - last edited Friday

Thanks for posting here.

Are you suggesting that the MAC filtering feature produces the opposite effect? May I ask:

Have you tested with different client devices?
Does this occur with all client devices?
Please provide screenshots showing (Please mask/redact several digits of the MAC addresses in your screenshots):
- The MAC address of the test client, and add it into the Deny list
- The screenshot of the Deny list--showing the MAC of the test client
- The screenshot of the client page--showing the MAC of the test client